CAT4104
700 mA Quad Channel
Constant Current LED Driver
Description
The CAT4104 provides four matched low dropout current sinks to
drive high−brightness LED strings up to 175 mA per channel. The
LED channel current is set by an external resistor connected to the
RSET pin. The LED pins are compatible with high voltage up to 25 V
supporting applications with long strings of LEDs.
http://onsemi.com
The EN/PWM logic input supports the device enable and high
frequency external Pulse Width Modulation (PWM) dimming control.
Thermal shutdown protection is incorporated in the device to
disable the LED outputs whenever the die temperature exceeds 150°C.
The device is available in the 8−pad TDFN 2 mm x 3 mm package
and the SOIC 8−Lead 150 mil wide package.
SOIC−8
V SUFFIX
CASE 751BD
TDFN−8
VP SUFFIX
CASE 511AK
PIN CONNECTIONS
1
Features
LED1
LED2
LED3
LED4
RSET
VIN
• 4 Matched LED Current Sinks up to 175 mA
• Up to 25 V Operation on LED Pins
EN/PWM
GND
• Low Dropout Current Source (0.4 V at 175 mA)
• LED Current Set by External Resistor
• High Frequency PWM Dimming via EN/PWM
• “Zero” Current Shutdown Mode
SOIC 8−lead
(Top View)
1
RSET
VIN
LED1
LED2
LED3
LED4
• Thermal Shutdown Protection
• TDFN 8−pad 2 x 3 mm and SOIC 8−lead Packages
EN/PWM
GND
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
TDFN 8−pad
(Top View)
Applications
• Automotive Lighting
• General and Architectural Lighting
• LCD Backlight
MARKING DIAGRAMS
VCC
3 V to 25 V
CAT4104V
HC
LEDs
CAT4104V = CAT4104V
HC = CAT4104VP2
CAT4104
VIN
5 V
VIN
LED1
LED2
LED3
LED4
OFF
EN/PWM
RSET
ON
ORDERING INFORMATION
Device
Package
Shipping
GND
R1
768 W
175 mA
CAT4104V−GT3
SOIC−8
3,000/
(Note 1)
(Pb−Free)
Tape & Reel
CAT4104VP2−GT3
(Note 1)
TDFN−8
(Pb−Free)
3,000/
Tape & Reel
Figure 1. Typical Application Circuit
1. Lead Finish is NiPdAu
© Semiconductor Components Industries, LLC, 2010
1
Publication Order Number:
March, 2010 − Rev. 2
CAT4104/D