CAW SERIES
30 WATTS
30 WATTS - CAQ SERIES
Quasi-Regulated, Triple Output
FEATURES
• 87% Typical Efficiency
• Industry Standard Package and Pin-Out
• No Derating to +85°C Case Temperature
• Current Limiting Short Circuit Protection
• Thermal Shutdown with Auto-Recovery
• Low Profile Package
• Ten Year Warranty
THE CAQ SERIES FROM WALL INDUSTRIES
The CAQ Series of triple output DC/DC converters performs
over a wide input voltage range (2:1), providing indefinite
short circuit and overvoltage protection. Without a heatsink,
the CA Series’ design technology allows for up to 30 watts
output power from a 3.0” x 3.0” x 0.40” case. These quasi
regulated converters are designed to maximize efficiency
and provide the power needed for board level applications.
SPECIFICATIONS: CAQ SERIES
GENERAL SPECIFICATIONS
All specifications apply @ +25 C ambient unless otherwise
noted.
Efficiency: at full load ........................87% (typical)
Isolation Voltage, input to output ..............500VDC
Isolation Resistance, input to output..........500MW
Switching Frequency ....................250kHz (typical)
INPUT SPECIFICATIONS
Input Voltages...........................................20-60,36-75VDC
Nominal Input......................................................36,48VDC
Input Filter.....................................................LC Input Filter
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature ..........-25 to +85°C (case)
Storage Temperature ......................-55 to +100°C
Humidity (non-condensing) ........20% to 95% R.H.
OUTPUT SPECIFICATIONS
Output Current.....................................................See table
Output Voltage Tolerance ......................................
Output Trim............................................................... 10%
Line Regulation: full load......................................... 0.5%
Load Regulation: (25-100% load)............................. 10%
Ripple/Noise (20MHz BW).................................75mV P-P
Short Circuit Protection.............................Current Limiting
Over Voltage Protection......................................See table
PHYSICAL SPECIFICATIONS
Shielding..................................................Six-Sided
Weight................................................approx. 4 oz.
Dimensions ..................................3.0 x 3.0 x 0.40”
Case Material..........................Black coated metal,
......................................non-conductive baseplate
Due to advances in technology, specifications subject to
change without notice.
1
603 778 2300
WWW.WALLINDUSTRIES.COM