CA3130, CA3130A
®
Data Sheet
August 1, 2005
FN817.6
15MHz, BiMOS Operational Amplifier with
MOSFET Input/CMOS Output
Features
• MOSFET Input Stage Provides:
12
CA3130A and CA3130 are op amps that combine the
advantage of both CMOS and bipolar transistors.
- Very High Z = 1.5 TΩ (1.5 x 10 Ω) (Typ)
I
- Very Low I . . . . . . . . . . . . . 5pA (Typ) at 15V Operation
I
. . . . . . . . . . . . . . . . . . . . . .= 2pA (Typ) at 5V Operation
• Ideal for Single-Supply Applications
Gate-protected P-Channel MOSFET (PMOS) transistors are
used in the input circuit to provide very-high-input
impedance, very-low-input current, and exceptional speed
performance. The use of PMOS transistors in the input stage
results in common-mode input-voltage capability down to
0.5V below the negative-supply terminal, an important
attribute in single-supply applications.
• Common-Mode Input-Voltage Range Includes
Negative Supply Rail; Input Terminals can be Swung 0.5V
Below Negative Supply Rail
• CMOS Output Stage Permits Signal Swing to Either (or
both) Supply Rails
A CMOS transistor-pair, capable of swinging the output
voltage to within 10mV of either supply-voltage terminal (at
very high values of load impedance), is employed as the
output circuit.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Ground-Referenced Single Supply Amplifiers
• Fast Sample-Hold Amplifiers
• Long-Duration Timers/Monostables
The CA3130 Series circuits operate at supply voltages
ranging from 5V to 16V, (±2.5V to ±8V). They can be phase
compensated with a single external capacitor, and have
terminals for adjustment of offset voltage for applications
requiring offset-null capability. Terminal provisions are also
made to permit strobing of the output stage.
• High-Input-Impedance Comparators
(Ideal Interface with Digital CMOS)
• High-Input-Impedance Wideband Amplifiers
• The CA3130A offers superior input characteristics over
those of the CA3130.
• Voltage Followers (e.g. Follower for Single-Supply D/A
Converter)
Ordering Information
• Voltage Regulators (Permits Control of Output Voltage
Down to 0V)
PART NO.
(BRAND)
TEMP.
RANGE ( C)
PKG.
DWG. #
o
PACKAGE
• Peak Detectors
CA3130AE
-55 to 125 8 Ld PDIP
-55 to 125 8 Ld SOIC
E8.3
CA3130AM
(3130A)
• Single-Supply Full-Wave Precision Rectifiers
• Photo-Diode Sensor Amplifiers
M8.15
CA3130AM96
(3130A)
-55 to 125 8 Ld SOIC
M8.15
M8.15
M8.15
Tape and Reel
Pinout
CA3130AMZ
(3130AZ) (Note)
-55 to 125 8 Ld SOIC
(Pb-free)
CA3130, CA3130A
(PDIP, SOIC)
TOP VIEW
CA3130AMZ96
-55 to 125 8 Ld SOIC
(3130AZ) (Note)
Tape and Reel (Pb-free)
CA3130E
-55 to 125 8 Ld PDIP
E8.3
E8.3
CA3130EZ
(Note)
-55 to 125 8 Ld PDIP*
(Pb-free)
OFFSET
1
2
3
4
8
7
6
5
STROBE
V+
NULL
INV.
INPUT
NON-INV.
INPUT
CA3130M
(3130)
-55 to 125 8 Ld SOIC
M8.15
M8.15
M8.15
M8.15
-
+
OUTPUT
CA3130M96
(3130)
-55 to 125 8 Ld SOIC
Tape and Reel
V-
OFFSET
NULL
CA3130MZ
(3130MZ) (Note)
-55 to 125 8 Ld SOIC
(Pb-free)
CA3130MZ96
(3130MZ)
-55 to 125 8 Ld SOIC
Tape and Reel (Pb-free)
*Pb-free PDIPs can be used for through hole wave solder processing only. They are not
intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate termination finish,
which are RoHS compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2005. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.