CA SERIES
25 TO 40 WATTS
25 TO 40 WATTS - CA SERIES
Ultra Wide Input Voltage Range, Low Profile
FEATURES
• Ultra-Wide Input Voltage Range (4:1)
• LC Input Filter for Low Reflected Ripple Current
• Regulated Outputs
• Thermal Shutdown with Auto-Recovery
• Current Limiting Short Circuit Protection
• 500VDC min. I/O Isolation
• Industry Standard Package and Pin-Out
• Industrial temperature grade also available
THE CA SERIES FROM WALL INDUSTRIES
The CA Series of single, dual and triple output DC/DC con-
verters performs over an ultra-wide input voltage range (4:1),
providing indefinite short circuit and overvoltage protection.
Without a heatsink, the CA Series’ design technology allows
for up to 40 watts output power from a 3.0 x 3.0 x 0.40”
case. These current mode control forward converters are
designed for improved transient response and reduced
stress on switching components.
SPECIFICATIONS: CA SERIES
GENERAL SPECIFICATIONS
All specifications apply @ +25 C ambient unless otherwise
noted.
Efficiency...........................................................80ꢀ typical
.............5VDC in................................................75ꢀ typical
Isolation Voltage (input to output)...................500VDC min.
Isolation Resistance (input to output)...............500MOhms
Switching Frequency...................................250kHz(typical)
INPUT SPECIFICATIONS
Input Voltages......................4.5-9,9-36, 18-75, 55-110VDC
Nominal Input...........................................5, 24, 48, 74VDC
Input Filter......................................................LC input filter
Remote On/Off Control........................Open Collector TTL
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (ambient).......-25 to 85ꢀ°C (case)
Storage Temperature.....................................-55 to +100°C
Temperature Coefficient.........................0.02ꢀ per °C max.
Humidity (non-condensing).......................20ꢀ to 95ꢀ R.H.
OUTPUT SPECIFICATIONS
Output Current......................................................see table
Voltage Tolerance.................... 1ꢀ primary, 2ꢀ auxiliary
Output Trim (external)......................... 10ꢀ (primary only)
Line Regulation...........................................................0.5ꢀ
Load Regulation.......................... 1ꢀ singles (see note 5)
Ripple/Noise (20MHz BW)..................................75mV p-p
Transient Response............<200u sec to within 1ꢀ Vout
PHYSICAL SPECIFICATIONS
Shielding...............................................................Six-sided
Weight..........................................................approx. 4.0 oz.
Case Material.......................................Black coated metal,
...................................................non-conductive base plate
Due to advances in technology, specifications subject to
change without notice.
1
603 778 2300
WWW.WALLINDUSTRIES.COM