®
RT7247C
2A, 18V, 800kHz Synchronous Step-Down Converter
General Description
Features
z
1.5% High Accuracy Reference Voltage
The RT7247C is a high efficiency, monolithic synchronous
step-down DC/DC converter that can deliver up to 2A
output current from a 4.5V to 18V input supply. The
RT7247C's current mode architecture and external
compensation allow the transient response to be
optimized over a wide input range and loads. Cycle-by-
cycle current limit provides protection against shorted
outputs, and soft-start eliminates input current surge during
start-up. The RT7247C also provides under voltage
protection and thermal shutdown protection. The low
current (<3μA) shutdown mode provides output
disconnection, enabling easy power management in
battery-powered systems. The RT7247C is available in
an SOP-8 (Exposed Pad) package.
z 4.5V to 18V Input Voltage Range
z 2A Output Current
z Integrated N-MOSFET Switches
z Current Mode Control
z Fixed Frequency Operation : 800kHz
z Output Adjustable from 0.8V to 12V
z Stable with Low ESR Ceramic Output Capacitors
z Up to 95% Efficiency
z Programmable Soft-Start
z Cycle-by-Cycle Over Current Limit
z Input Under Voltage Lockout
z Output Under Voltage Protection
z Thermal Shutdown Protection
z RoHS Compliant and Halogen Free
Marking Information
Applications
RT7247CHGSP : Product Number
z Wireless AP/Router
RT7247CH
GSPYMDNN
YMDNN : Date Code
z Set-Top-Box
z Industrial and Commercial Low Power Systems
z LCDMonitors and TVs
z Green Electronics/Appliances
z Point of Load Regulation of High-PerformanceDSPs
Simplified Application Circuit
BOOT
RT7247C
VIN
V
IN
C
BOOT
C
IN
L
SW
V
OUT
Chip Enable
R1
R2
EN
SS
C
OUT
FB
C
SS
C
C
R
C
GND
COMP
C
P
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS7247C-02 September 2012
www.richtek.com
1