F-212
C28T–06.00–RPS8–BJT8
CJT–T–P–HH–ST–TH1
CJT–T–P–HH–RA–BH1
(1,27mm) .050"
C28T, CJT SERIES
100Ω SHIELDED TWISTED PAIR SYSTEM
SPECIFICATIONS
For complete specifications
see www.samtec.com?C28T
END 1
CONNECTOR
END 2
CONNECTOR
OVERALL
LENGTH
TYPE
RF Connector:
Outer Contact Material:
Phosphor Bronze (Plug),
Brass (Jack)
Center Contact Material:
Phosphor Bronze (Terminals)
BeCu (Sockets)
Mates with:
CJT, C28T
Specify
–“XX.XX”
= Overall Length
in Inches
(101,6mm) 04.00"
minimum
END OPTIONS
from chart
C28T
= 28 AWG shielded twisted pair
Insulator Material: PTFE
Operating Temperature:
Testing Now!
END OPTIONS
Voltage Rating:
Testing Now!
–SPS8 =
Dielectric Withstanding
Voltage:
Straight Plug with Sockets
(30µ" (0,76µm) Gold on Center Contact,
Gold Flash on Shell)
Testing Now!
Frequency Range:
0 - 4 GHz
Contact Resistance:
Testing Now!
XX.XX
= OAL
(inches)
STRIPPED & TINNED
(Dimensions in inches)
–RPS8 =
Right Angle Plug with Sockets
(30µ" (0,76µm) Gold on Center Contact,
Gold Flash on Shell)
Insulator Resistance:
Testing Now!
A
B
C
CALLOUT
Impedance: 100Ω
RoHS Compliant: Yes
–303030 .30 .30 .30
–303040 .30 .30 .40
–403030 .40 .30 .30
–403040 .40 .30 .40
–BJT8 =
Cable:
Bulkhead Jack with Terminals
(30µ" (0,76µm) Gold on Center Contact,
Gold Flash on Shell)
Cable:
28 AWG shielded twisted pair
Signal Routing:
100Ω Differential
Insulator Material: PTFE
RoHS Compliant: Yes
–SING =
Single Ended
(End 2 callout)
Both center conductors and
braid shield are stripped,
only the center
conductors are tinned.
Call Samtec for other
sizes or tinning options.
–XXXXXX =
Stripped & Tinned
(End 2 callout)
C
B
A
Note:
Cable lengths longer than
20.00" (0.50 meter) are not
supported with S.I. test data.
–RPS8–BJT8 SHOWN
(See chart for callout)
SPECIFICATIONS
For complete specifications and
recommended PCB layouts see
www.samtec.com?CJT-TH or
www.samtec.com?CJT-BH
GENDER
TYPE
PLATING
ORIENTATION
TERMINATION
CJT
Mates with:
C28T
Shell Material:
Brass
Insulator Material:
PTFE
Contact Material:
Phosphor Bronze
Frequency Range:
0-4 GHz
–ST
–T
–P
–HH
= 30µ"
(0,76µm)
Gold on
pins and
–TH1
= Standard
Through-hole
= Straight
= Terminal
= PCB Mount
(0,70)
.028
DIA
(3,15)
.124 DIA
–RA
(1,27)
.050
= Right Angle
–BH1*
= Standard
Bulkhead
Through-hole
(–RA only)
outer contact
(6,35)
.250
(6,35)
.250
(9,05)
.356
(8,81)
.347
Working Voltage:
Testing Now!
Dielectric Withstanding:
Testing Now!
Contact Resistance:
Testing Now!
Impedance:
* Lock washer, nut and gasket supplied
unassembled with Bulkhead option.
(4,70)
.185
DIA
–ST–TH1
(10,60)
(2,54) .100
(18,86) .743
.417
DIA
–RA–TH1
(10,86) .428
100Ω
(7,31)
.288
RoHS Compliant:
Yes
(10,01)
.394
(9,76)
.384
Lead-Free Solderable:
Yes
(3,30)
.130
(2,54)
.100
(2,54)
.100
(0,51)
.020
(3,70)
.146
–RA–BH1*
WWW.SAMTEC.COM