Model C150N50Z4
Surface Mount Termination
150 Watts, 50
ꢀ
Description
The C150N50Z4 is high performance Aluminum Nitride (AlN) surface
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high
power handling makes the part ideal for terminating high power 90
degree couplers and for use in microstrip circuits. The termination is also
RoHS compliant!
Features:
• RoHS Compliant
• 150 Watts
General Specifications
Resistive Element
Substrate
Thick film
• DC – 4.0 GHz
• AlN Ceramic
AlN Ceramic
Terminal Finish
Operating Temperature
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Matte Tin over Nickel Barrier
• Non-Nichrome Resistive
-50 to +200°C (see de rating chart)
Element
• Low VSWR
Electrical Specifications
•
•
100% Tested
Small Size
Resistance Value:
Power:
50 Ohms, ± 2%
150 Watts
Frequency Range:
DC – 4.0 GHz
>24 dB DC - 2.7 GHz
>20 dB DC - 4.0 GHz
Return Loss
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe
: