I M A G E S E N S O R
CCD multichannel detector head
C10150,
C10151
Designed for back-thinned CCD area image sensor
C10150 and C10151 are high sensitivity multichannel detector heads for use with back-thinned FFT-CCD area image sensors (S10140/S10141
series) that offer high UV sensitivity and quantum efficiency. C10150 is designed for the non-cooled back-thinned CCD image sensor (S10140
series), while C10151 for the one-stage TE-cooled CCD area image sensors (S10141 series) for detection at even lower light levels. Both C10150
and C10151 incorporate a low-noise driver/amplifier circuit that provides reliable operation from simple external signals. C10151 also includes a
highly stable temperature controller that cools the sensor to a preset temperature level (Ts= -10 ˚C) as soon as the power is turned on. If the
cooler fails and causes internal circuitry to overheat, the built-in protection circuit automatically turns off the power to the thermoelectric cooler.
Despite its compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow
connections to other devices such as monochrometers. The table below shows back-thinned CCD image sensors for C10150 and C10151.
C10150 and C10151 do not come with a CCD image sensor, so select the desired sensor and order it separately.
Controller for multichannel detector head C7557 is also available. The software supplied with the C7557 allows easy control of the multichannel
detector head and data acquisition.
Features
Applications
Designed for back-thinned CCD area image sensor *1
C10150: for non-cooled type (S10140 series)
C10151: for TE-cooled type (S10141 series)
Line binning operation *2/area scanning operation
Driver/amplifier circuit for low noise CCD operation
Highly stable temperature controller (C10151)
Cooling temperature: -10 ± 0.05 ˚C
Fluorescence spectroscopy
Raman spectroscopy
Other low-light-level detection
Simple signal input operation
Compact configuration
ꢀ Selection guide
The table below shows CCD area image sensors applicable for C10150, C10151.
Since C10150, C10151 do not include a CCD area image sensor, so select the desired sensor and order it separately.
CCD area image sensor
Type No.
Active area
[mm (H) × mm (V)]
12.288 × 1.464
12.288 × 3.000
12.288 × 6.072
24.576 × 1.464
24.576 × 3.000
24.576 × 6.072
12.288 × 1.464
12.288 × 3.000
12.288 × 6.072
24.576 × 1.464
24.576 × 3.000
24.576 × 6.072
Type No.
Number of pixels
Number of active pixels
S10140-1007
S10140-1008
S10140-1009
S10140-1107
S10140-1108
S10140-1109
S10141-1007
S10141-1008
S10141-1009
S10141-1107
S10141-1108
S10141-1109
1044 × 128
1044 × 256
1044 × 512
2068 × 128
2068 × 256
2068 × 512
1044 × 128
1044 × 256
1044 × 512
2068 × 128
2068 × 256
2068 × 512
1024 × 122
1024 × 250
1024 × 506
2048 × 122
2048 × 250
2048 × 506
1024 × 122
1024 × 250
1024 × 506
2048 × 122
2048 × 250
2048 × 506
C10150
C10151
*1: In normal CCD image sensors that receive light from the front surface, the active area is covered with electrodes for charge transfer.
These electrodes cut off UV radiation incident on the image sensor and also reduce the quantum efficiency. In contrast, back-
thinned CCD image sensors have a unique structure in which the back of the active area is finely ground to allow light to enter from
the back surface. This structure ensures high UV sensitivity and quantum efficiency because incident light need not pass through the
electrodes.
*2: The FFT-CCD was originally designed as a two-dimensional image sensor. However, it can be operated like a linear image sensor
having a large active area by transferring all the pixel signals in the vertical direction to the horizontal register (this is referred to as
line binning).
1
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
