NCP729
200 mA Ultra-Low Noise
Very-Low Iq, High PSRR,
LDO Linear Voltage
Regulator
http://onsemi.com
The NCP729 is a 200 mA LDO suitable to provide clean analog
power supply rails for noise sensitive applications. This device
features Ultra−Low Noise performance, High Power Supply Rejection
Ratio and Very good transient response characteristics. Very Low
Dropout and Very Low Quiescent Current makes this LDO an
attractive choice for wide range of battery powered, portable products.
Current Limit and Thermal Shutdown provide protection during
failure conditions. NCP729 is available in 1.06 mm x 1.06 mm Chip
Scale Package and it is stable with small 1 mF Ceramic capacitors.
4 BUMP CSP
FC SUFFIX
CASE 568AD
DEVICE MARKING INFORMATION
Features
• Operating Input Voltage Range: 2.0 V to 5.5 V
A1
XXX
YWW
• Fixed Voltage Options Available: 0.8 V to 3.5 V
• Very Low Quiescent Current: Max. 50 mA over Temperature
• Ultra Low Noise: 10 mV
from 100 Hz to 100 kHz
RMS
XXX = Specific Device Code
= Year
WW = Work Week
• Very Low Dropout: 86 mV Typical at 200 mA
2% Accuracy over Full Load, Line and Temperature Variations
Y
•
• High PSRR: 72 dB at 1 kHz
• Thermal Shutdown and Current Limit Protections
• Stable with a 1 mF Ceramic Output Capacitor
• Available in 1.06 mm x 1.06 mm 4−bump CSP Package
• Active Output Discharge for Fast Turn−Off
• These are Pb−free Devices
PIN CONNECTIONS
EN IN
A1
B1
A2
B2
GND OUT
(Top View)
Typical Applications
• PDAs, Tablets, GPS, Smartphones
• Wireless Handsets, Wireless LAN, Bluetooth, Zigbee
• Portable Medical Equipment
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
• Other Battery Powered Applications
V
IN
V
OUT
IN
OUT
NCP729
C
1 mF
Ceramic
OUT
C
IN
EN
ON
GND
OFF
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
August, 2012 − Rev. 1
NCP729/D