BYV32-50 THRU BYV32-200
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 150 Volts
Forward Current - 18.0 Amperes
TO-220AB
FEATURES
♦ Dual rectifier construction, positive centertap
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junctions
♦ Low power loss
0.185 (4.70)
0.175 (4.44)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.055 (1.39)
DIA.
0.148 (3.74)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
♦ Low forward voltage,
0.560 (14.22)
0.530 (13.46)
high current capability
♦ High surge capability
0.410 (10.41)
0.390 (9.91)
0.350 (8.89)
0.635 (16.13)
0.330 (8.38)
0.625 (15.87)
PIN
1.148 (29.16)
2
1
3
♦ Superfast recovery time for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
1.118 (28.40)
0.110 (2.79)
0.160 (4.06)
0.140 (3.56)
0.100 (2.54)
0.560 (14.22)
0.530 (13.46)
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body over
passivated chips
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.35)
0.105 (2.67)
0.095 (2.41)
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
0.205 (5.20)
0.195 (4.95)
PIN 2
CASE
PIN 1
PIN 3
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
BYV32-50
50
BYV32-100
100
BYV32-150
150
BYV32-200
200
UNITS
Volts
Volts
Volts
Maximum repetitive peak reverse voltage
Maximum RMS voltage
35
70
105
140
Maximum DC blocking voltage
50
100
150
200
Maximum average forward rectified current
at TC=120°C
I(AV)
18.0
Amps
Amps
Peak forward surge current
10ms single half sine-wave superimposed at
at TJ=150°C
IFSM
150.0
Maximum instantaneous forward voltage per leg at:
IF=20A
IF=5.0A, TJ=100°C
VF
1.15
0.85
Volts
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
10.0
600.0
IR
µA
Maximum reverse recovery time per leg (NOTE 1)
Typical junction capacitance per leg (NOTE 2)
trr
25.0
45.0
ns
CJ
pF
RΘJA
RΘJC
20.0
3.0
Maximum thermal resistance per leg (NOTE 3)
Operating and storage temperature range
°C/W
°C
TJ, TSTG
-65 to +150
NOTES:
(1) Reverse recovery test conditions: IF=1A VR=30V, di/dt=100A/µs, Irr=10% IRM
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
4/98