5秒后页面跳转
BXB75-48S12FHT PDF预览

BXB75-48S12FHT

更新时间: 2024-09-17 23:38:59
品牌 Logo 应用领域
其他 - ETC 转换器光电二极管
页数 文件大小 规格书
3页 74K
描述
DC to DC Converter

BXB75-48S12FHT 数据手册

 浏览型号BXB75-48S12FHT的Datasheet PDF文件第2页浏览型号BXB75-48S12FHT的Datasheet PDF文件第3页 
BXB75 Series  
S i n g l e o u t p u t  
DC/DC CONVERTERS 50-75W Wide Input DC/DC Converters  
1
Industry standard footprint  
MTBF >1.4 million hours (Bellcore 332)  
Input voltage to ETS300-132-2  
Adjustable output voltage  
No minimum load required  
Separate case ground pin  
2:1 input range for battery powered applications  
Undervoltage lockout (UVLO)  
UL, VDE and CSA safety approvals  
The BXB75 Series are high power density DC/DC converters packaged in the industry  
standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when  
specifying for both new and replacement designs. Suitable for a wide range of  
applications in nearly any industry, the BXB75 was particularly designed with  
communication and distributed power applications in mind. Using Bellcore 332, the  
MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four  
threaded M3 inserts makes heatsink attachment and optimum thermal management  
easy. The BXB75 series is approved to IEC950 by UL, CSA and VDE.  
2 YEAR WARRANTY  
All specifications are typical at nominal input, full load at 25°C unless otherwise stated  
SPECIFICATIONS  
OUTPUT SPECIFICATIONS  
Voltage adjustability  
INPUT SPECIFICATIONS (continued)  
Undervoltage lockout  
48Vin: power up  
48Vin: power down  
34V  
60% to 110%  
±1.0%  
±0.05%  
±0.10%  
0%  
32.5V  
Set point accuracy  
Start-up time  
(See Note 8)  
Power up  
Remote ON/OFF  
20ms  
20ms  
Line regulation  
Load regulation  
Minimum load  
Overshoot  
Low line to high line  
Full load to min. load  
EMC CHARACTERISTICS  
Conducted emissions  
(See Note 3)  
Bellcore 1089  
Level A  
Level A  
Level A  
FCC part 15  
At turn-on and turn-off  
None  
EN55022, CISPR22  
Undershoot  
None  
GENERAL SPECIFICATIONS  
Ripple and noise  
(5Hz to 20MHz)  
(See Note 1)  
3.3V and 5V  
12V  
75mV pk-pk,  
20mV rms  
100mV pk-pk,  
30mV rms  
Efficiency  
See table  
Isolation voltage  
Input/case  
Input/output  
Output/case  
1500VDC  
1500VDC  
1500VDC  
Temperature coefficient  
±0.01% /°C  
Switching frequency  
Fixed  
500kHz typ.  
Transient response  
(See Note 2)  
±2.0% max. deviation  
170µs recovery  
Approvals and  
standards (See Note 5)  
VDE0805, EN60950, IEC950  
UL1950, CSA C22.2 No. 950  
to within ±1.0%  
Case material  
Aluminum baseplate  
with plastic case  
Remote sense  
0.5VDC transmission  
line drop compensation  
Material flammability  
Weight  
UL94V-0  
INPUT SPECIFICATIONS  
Input voltage range  
Input current  
110g (3.88oz)  
48Vin nominal  
36 to 75VDC  
MTBF  
Bellcore 332  
MIL-HDBK-217F  
1,400,000 hours min.  
580,000 hours min.  
No load  
Remote OFF  
100mA max.  
20mA max.  
@ 40°C, 100% full load  
Input current (max.)  
(See Note 4)  
3.5A max. @ Io max.  
and Vin = 0 to 75V  
ENVIRONMENTAL SPECIFICATIONS  
Thermal performance  
Altitude  
Operating case temp. -40°C to +100°C  
Input reflected ripple  
(See Note 6)  
5mA pk-pk  
Non-operating  
-55°C to +125°C  
Active low remote ON/OFF  
(See Note 7)  
Operating  
Non-operating  
10,000 feet max.  
40,000 feet max.  
Logic compatibility  
Open collector ref to -input  
1.2VDC max.  
ON  
OFF  
Open circuit  
Vibration  
5Hz to 500Hz  
2.4G rms (approx.)  
File Name: BXB75S.PDF Rev: 02 Oct 2002  

与BXB75-48S12FHT相关器件

型号 品牌 获取价格 描述 数据表
BXB75-48S12FLT ARTESYN

获取价格

Single output
BXB75-48S12FLTJ EMERSON-NETWORKPOWER

获取价格

Industry standard footprint MTBF >1.4 million hours (Bellcore 332)
BXB75-48S15 ETC

获取价格

Analog IC
BXB75-48S15FHT ETC

获取价格

Analog IC
BXB75-48S15FLT ARTESYN

获取价格

Single output
BXB75-48S3V3 ETC

获取价格

Analog IC
BXB75-48S3V3FHT ETC

获取价格

DC to DC Converter
BXB75-48S3V3FLT ARTESYN

获取价格

Single output
BXB75-48S3V3FLTJ EMERSON-NETWORKPOWER

获取价格

Industry standard footprint MTBF >1.4 million hours (Bellcore 332)
BXC RUBYCON

获取价格

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS