TO ORDER CALL
TEL: (630) 628-9999
FAX:(630) 628-9922
300 W Factory Road
Addison, IL 60101
TOLL FREE: (888) 797-8652
EMAIL: sales@powervolt.com
StepperPower™
RoHS
The Power Supply for Stepping Motors
Series: BVU6000 & PV5000
● Fully compatible with Pacific Scientific (and other) stepping motor drivers
series 5200, 5300, 5400, 6400.
● Space saving compact modules provide mounting studs for motor drivers.
● Integral motor and logic-power (where applicable).
● Models to drive one or two motors.
● 120VAC or 240VAC models; input taps to match actual line voltages.
● Custom units available.
● Safety Agency Approvals BVU Series:
− UL 1950, third edition, File #E181899.
− CSA, C22.2 No.950, File #E181899.
− CE Marked.
StepperPower™
The StepperPower™, Series PV5000 and BVU6000, is an
Space saving compact power module provides
mounting studs for motor drivers
integral power supply module especially designed to
The StepperPower™ modules, series PV5000 and
operate stepper motors. Motor and logic power supplies are BVU6000, feature a transformer with high efficiency and
both incorporated in one package (when applicable). excellent regulation that assures a compact physical size.
Models are available to drive one or two motors. The single They are assembled on space saving L- or U-shaped
driver modules are assembled on L-shaped chassis with chassis.PEM nuts for mounting the driver modules are
threaded (# 6-32) PEM nuts to mount motor driver. The dual provided on one side of the L-bracket and on the both side
driver module feature a U-shaped chassis with threaded
(#6-32) PEM nuts on both side to mount two motor drivers.
This makes it an integral space saving unit eliminating the
need for installing and wiring different pieces.
of the U-chassis. Once the drivers are mounted on the
power module, they become fully self-contained units
without any need of external components. The outputs are
lead wires that can be wired directly to the screw terminal
connector available on the driver modules. This simplifies
the installation and saves wiring time.
Integral motor and logic power supplies
The motor and logic power supplies required to operate the
stepping motors and associated control logic are both
incorporated in one unit. This eliminates the need to install
and wire two different power supplies to separately
mounted driver modules. The motor power is unregulated
DC voltage; while the logic power is a fully regulated DC
output that is maintained within tight regulation (± 0.25V)
over a large range of input AC voltage.
Input taps to match actual line voltages
As the motor power is unregulated, it tends to vary with
the input line voltage. For example, if a high line is
applied at the 120VAC tap, the motor output voltage may
exceed the safe operating limit of the driver and cause
damage. The taps are provided so that in high line
locations, the output voltage can be kept within the safe
operating limit by using the corresponding tap. The logic
power is regulated and is not affected by the input line
voltage over a wide range (95VAC to 135VAC when
connected to 120VAC tap).
Models to drive one or two motors
The single motor drives are commonly used. However, in a
multi axis-control application, the dual driver models are a
very cost effective and space saving alternative. In the single
as well as dual driver modules, the voltage and current
Custom designs to match other applications
ratings are provided to allow maximum motor torque without PowerVolt will design any other custom units to match
exceeding the safe operating voltage and current limits.
When operating two drivers from one power supply, the
effect of regenerative energy must be considered to assure
safe operation of the drives.
your application. Please call or e-mail us for quotes.
5秒后页面跳转
TLP250光耦合器：资料手册参数分析
DA14580 低功耗蓝牙系统级芯片(SoC)：资料手册参数分析
INA226 高精度电流和功率监控器：资料手册参数分析
SI2302 N沟道MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
