TS5070
TS5071
PROGRAMMABLE CODEC/FILTER
COMBO 2ND GENERATION
COMPLETE CODEC AND FILTER SYSTEM
INCLUDING :
– TRANSMIT AND RECEIVE PCM CHANNEL
FILTERS
– µ-LAW OR A-LAW COMPANDING CODER
AND DECODER
– RECEIVE POWER AMPLIFIER DRIVES
300 Ω
– 4.096 MHz SERIAL PCM DATA (max)
PROGRAMMABLE FUNCTIONS :
– TRANSMIT GAIN : 25.4 dB RANGE, 0.1 dB
STEPS
– RECEIVE GAIN : 25.4 dB RANGE, 0.1 dB
STEPS
– HYBRID BALANCE CANCELLATION FIL-
TER
DIP20 (Plastic)
ORDERING NUMBER:TS5071N
– TIME-SLOT ASSIGNMENT: UP TO 64
SLOTS/FRAME
– 2 PORT ASSIGNMENT (TS5070)
– 6 INTERFACE LATCHES (TS5070)
– A OR µ-LAW
– ANALOG LOOPBACK
– DIGITAL LOOPBACK
DIRECT INTERFACE TO SOLID-STATE
SLICs
SIMPLIFIES TRANSFORMER SLIC, SINGLE
WINDING SECONDARY
PLCC28
ORDERING NUMBER: TS5070FN
STANDARD SERIAL CONTROL INTERFACE
80 mW OPERATING POWER (typ)
1.5mW STANDBY POWER (typ)
MEETS OR EXCEEDS ALL CCITT AND
LSSGR SPECIFICATIONS
TTL AND CMOS COMPATIBLE DIGITAL IN-
TERFACES
Channel gains are programmable over a 25.4 dB
range in each direction, and a programmable filter
is included to enable Hybrid Balancing to be ad-
justed to suit a wide range of loop impedance con-
ditions.
Both transformer and active SLIC interface circuits
with real or complex termination impedances can
be balanced by this filter, with cancellation in ex-
cess of 30 dB beingreadily achievablewhenmeas-
ured acrossthe passbandagainststandardtest ter-
mination networks.
To enable COMBO IIG to interface to the SLICcon-
trol leads, a number of programmable latches are
included ; each may be configured as either an in-
put or an output. The TS5070 provides 6 latches
and the TS5071 5 latches.
DESCRIPTION
The TS5070 series are thesecondgenerationcom-
bined PCM CODEC and Filter devices optimized
for digital switching applicationson subscriber and
trunk line cards.
Using advancedswitched capacitortechniquesthe
TS5070 and TS5071 combine transmit bandpass
and receive lowpass channel filters with a com-
panding PCM encoder and decoder. The devices
are A-law and µ-law selectable and employ a con-
ventional serial PCM interface capable of being
clocked up to 4.096 MHz. A number of programma-
ble functions may be controlledvia a serial control
port.
March 1994
1/30