Datasheet
CMOS LDO Regulators for Portable Equipments
1ch 200mA
CMOS LDO Regulators
BUxxSA4 series
●General Description
●Key Specifications
Input Power Supply Voltage Range:
1.7V to 5.5V
0 to 200mA
-40℃ to +85℃
1.8V,2.5V,2.55V
2.8V,3.0V,3.3V
±0.6%
BUxxSA4 series are high-performance CMOS LDO
regulators with output current ability of up to 200-mA.
These devices have excellent noise and load response
characteristics despite of its low circuit current
consumption of 40µA. They are most appropriate for
various applications such as power supplies for logic IC,
RF, and camera modules.
Output Current Range:
Operating Temperature Range:
Output Voltage Lineup:
Output Voltage Accuracy:
Circuit Current:
Standby Current:
40µA(Typ.)
0μA (Typ.)
●Package
UCSP50L1(BUXXSA4WGWL)
W(Typ.) x D(Typ.) x H(Max.)
0.8mm x 0.8mm x 0.5mm
●Features
High Output Voltage Accuracy: ±0.6%
(±15mV on VOUT<2.5V)
High Ripple Rejection: 70 dB (Typ, 1 kHz,)
Compatible with small ceramic capacitor
(Cin=Cout=0.47 µF)
Low Current Consumption: 40 µA
Output Voltage ON/OFF control
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
Adopting ultra-small WLCSP UCSP50L1
●Applications
Portable devices
Camera modules
Other electronic devices using microcontrollers or
logic circuits
●Typical Application Circuit
Vin
VOUT
VIN
Vout
Cin
On
Cout
BUxxSD2MG-M
BUxxSA4
STBY
Off
GND
Figure 1. Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays
.www.rohm.com
TSZ02201-0RBR0A300100-1-2
2013.04.04 Rev.001
© 2012 ROHM Co., Ltd. All rights reserved.
1/34
TSZ22111・14・001