Datasheet > BTS5242-2L

BTS5242-2L

更新时间： 2024-01-20 21:59:31

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

BTS5242-2L 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	SOIC
包装说明：	SSOP, SOP12,.4,40	针数：	12
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	8.04
内置保护：	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE	驱动器位数：	2
接口集成电路类型：	HALF BRIDGE BASED PERIPHERAL DRIVER	JESD-30 代码：	R-PDSO-G12
长度：	7.5 mm	湿度敏感等级：	3
功能数量：	1	端子数量：	12
输出电流流向：	SINK	标称输出峰值电流：	4.5 A
封装主体材料：	PLASTIC/EPOXY	封装代码：	SSOP
封装等效代码：	SOP12,.4,40	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, SHRINK PITCH	峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	9/16 V	认证状态：	Not Qualified
座面最大高度：	2.6 mm	子类别：	Peripheral Drivers
最大供电电压：	28 V	最小供电电压：	4.5 V
标称供电电压：	13.5 V	表面贴装：	YES
技术：	MOS	端子形式：	GULL WING
端子节距：	1 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	断开时间：	250 µs
接通时间：	250 µs	宽度：	6.4 mm
Base Number Matches：	1

Edition 2008-09-01

Published by

Infineon Technologies AG

81726 Munich, Germany

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or

characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any

information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties

and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights

of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure

of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support

devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain

and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may

be endangered.

1...21 22 2324

下载PDF