1
Optoway
BTRS-77120C-1510G
***********************************************************************************************************************************************************************
BTRS-77120C-1510G / BTRS-77120AC-1510G
1510 nm TX / 1590 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber Transceiver
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Single Fiber Bi-Directional Transceiver
l 1510 nm DFB LD Transmitter
l 1590 nm Receiver
The BTRS-77120C-1510G series is high performance
module for single fiber communications by using 1510 nm
transmitter and 1590 nm receiver. A guaranteed minimum
optical link budget of 31 dB is offered which can correspond
to a link distance of over 120 km (assuming worst case fiber
l 31 dB Power Budget at Least
l Distance Up to 120 km
l 0 to 70oC Operating
loss of 0.22 dB/km). The transmitter section uses a
l Speed up to 1300 Mbps
multiple quantum well 1510 nm DFB laser and is a class 1
laser compliant according to International Safety Standard
IEC 60825. The receiver section uses an integrated 1590 nm
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry. Signal Detect with
LC-TTL is used.
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Differential Inputs and Outputs
l 0 to 70oC Operating: BTRS-77120C-1510G
l -20 to 85oC Operating: BTRS-77120AC-1510G
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
APPLICATIONS
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
Distance
(km)
TX
(nm)
RX
(nm)
Voltage Package
(V)
Temp
(oC)
TX
Power
(dBm)
RX Sens. RoHS
(dBm) Compliant
BTRS-77120C-1510G
BTRS-77120AC-1510G
1.25
1.25
120
120
1510 DFB
1510 DFB
1590
1590
3.3
3.3
SC, 2X5
0 to 70
3 to -2
3 to -2
-33
-33
Yes
Yes
SC, 2X5 -20 to 85
Note: 1. BTRS-XXXXX is SFF SC receptacle type package.
2. BTRS-XXXXX-APBBB is SFF pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Min
-40
0
Max
85
Units
oC
Notes
Topr
70
85
oC
BTRS-77120C-1510G
BTRS-77120AC-1510G
Air flow 1m/sec
-20
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
oC
V
10 seconds on leads only
0
GND
0
Vcc
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Symbol
Vcc
Min
Typ
Max
Units / Notes
Power Supply Voltage
3.13
3.3
3.47
V
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
10/1/2009 V3.0