BR150
Miniature
4PDT
Dry Circuit to 2 Amp
To MIL-PRF-39016
SPECIFICATIONS
GENERAL
ENVIRONMENTAL
Contact Arrangement .......................... 4PDT (4 Form C)
Weight............................................................. 0.3 oz max.
Designed to meet the requirements of MIL-PRF-39016/14
Temperature Range............................... -65oC to +125oC
Vibration (Note 2)............................... 0.4" DA 10 - 38 Hz,
30 G's 38 - 2,000 Hz
Shock (Operating) (Note 2) ........................ 75 G's 11 ms
PERFORMANCE
Contact Rating (Note 1)
Resistive .......................................... 2 Amp @ 28 VDC
0.5 Amp @ 115V 60 + 400 Hz
ELECTRICAL CHARACTERISTICS
(Case Ungrounded)
Inductive ........................................ 0.5 Amp @ 28 VDC
Lamp ............................................. 0.1 Amp @ 28 VDC
Low Level .............................10-50µA @ 10-50 mv DC
or peak AC (Note 4)
Duty Cycle........................................................Continuous
Insulation Resistance
10,000 megohms @ 500V 25oC
1,000 megohms @ 500V 125oC
Life ...................................100,000 operations minimum
Dielectric Strength:
@ 1 amp load, 125oC
Sea Level:
Pull In Power............................................250 mw approx.
Operate/Release Time .................... 4 ms max, excluding
bounce time at nominal coil voltage
Contact Bounce Time...................... 2 ms max @ 1 Amp
28 VDC contact load
Contact to Case...................................... 750 VRMS
Contact to Coil ........................................ 750 VRMS
Coil to Case ............................................ 500 VRMS
Across Open Contacts ........................... 500 VRMS
70,000 Feet
Contact Resistance
All points.................................................. 350 VRMS
Before Life.........................0.050 Ohms max @ 1 Amp
and 6 VDC
After Life............................0.150 Ohms max @ 1 Amp
and 6 VDC
M39016/14 QUALIFIED to ER level M
Notes:
1. For case grounded loads and other ratings, consult the
factory.
3. For other ratings consult the factory.
4. Relay contacts which have switched high level currents
are no longer suitable for switching low level loads.
2. For applications requiring other shock and vibration
levels, consult the factory.
14930 E. Alondra Blvd., La Mirada, CA 90638-5752 (714) 994-6500 FAX (714) 994-3013
W: 2000 Rev. 2