Product Information
Issue No 2
No: PIS 091
Date Feb 98
Vermason
Bin 22
Page 1 of 1
Approved by
Pink Antistatic Layflat Tube and Bags
Code BQ3..
Description
These products are made of an antistatic polyethylene film that under normal working conditions doesn't generate triboelectric
charges. The film is tough, amine free, does not affect polycarbonate housings and does not cause corrosion. The product is
transparent and tinted pink. It is available in a range of bag sizes as well as roll widths. Typical film thickness is 75 micron.
Bags are hot foil printed in black or yellow, with a descriptive text and logo to comply with
EN100015 Part 1.
non-ESD sensitive
The film is designed for use as packaging for
devices that are required in ESD protected areas e.g. passive
components, screws. The antistatic properties are long lasting provided the film is stored in a cool dry place. Do not store outside and
do not expose the film to heat or store in an overheated warehouse.
Typical physical properties
MD = Machine direction CD = Cross direction
Tensile strength
MD
CD
30
29
kPa
kPa
ASTM D882-A
ASTM D882-A
ASTM D882-A
ASTM D1709-A
Elongation at break
Elmendorf tear strength
MD
CD
1000
1100
%
%
MD
CD
8
10
N
N
Dart drop impact strength
Water vapour transmission rate
Weight
300
gr
<0.8
0,07
gr/m2 24 hr at 50% rH & 20oC
kg/m2
Roll and bag width tolerance
(inside)
+15
-2
mm
mm
Bag length tolerance
(inside)
+30
-2
mm
mm
Typical electrical properties
Surface resistivity
<1011 ohm per square
<2 sec
DIN54382
Charge decay time
EIA541 appendix F
Availability and dimensions
Tubing is available in six standard widths of 3", 4", 6", 8", 10" and 12". Other widths up to 32" (813 mm) are made to order.
Standard roll length is 500 m but we will also make to other lengths.
Bags are available in standard sizes 3" x 5", 4" x 6", 6" x 8", 6" x 10", 8" x 10", 8" x 12",
10" x 12", 12" x 16" but here too we are pleased to make other requirements. The first dimension is the width of the opening of the
bag, the second is the length of the inside of the bag. The bottom skirt of the bag i.e. from weld to bottom of the bag is approximately
4 mm.
Any technical inquiries should be directed to Technical Service and Development
on +44 (0) 1462 672005 or Email: TSND@Vermason.co.uk
Vermason Limited, Birds Hill, Letchworth, Herts. SG6 1HX. United Kingdom