bq3060
www.ti.com
SLUS928A –MARCH 2009–REVISED NOVEMBER 2009
SBS 1.1-COMPLIANT GAS GAUGE and PROTECTION with CEDV
Check for Samples: bq3060
1
FEATURES
•
Advanced CEDV (Compensated
APPLICATIONS
End-of-Discharge Voltage) Gauging
•
•
•
Netbook/Notebook PCs
Medical and Test Equipment
Portable Instruments
•
Fully Integrated 2, 3, and 4 Series Li-Ion or
Li-Polymer Cell Battery Pack Manager
•
•
8-Bit RISC CPU With Ultra-Low Power Modes
DESCRIPTION
Full Array of Programmable Protection
Features
The Texas Instruments bq3060 Battery Manager is a
fully integrated, single-chip, pack-based solution that
provides a rich array of features for gas gauging,
protection, and authentication for 2, 3, or 4 series cell
Li-Ion battery packs. With a footprint of merely
7.8mmx6.4mm in a compact 24-pin TSSOP package,
the bq3060 maximizes functionality and safety while
dramatically cutting the solution cost and size for
smart batteries.
–
Voltage, Current, and Temperature
•
•
SHA-1 Authentication
Flexible Memory Architecture With Integrated
Flash Memory
•
Supports Two-Wire SMBus v1.1 Interface With
High-speed 400kHz Programming Option
•
•
•
P-CH High Side Protection FET Drive
Using its integrated high-performance analog
peripherals, the bq3060 measures and maintains an
accurate record of available capacity, voltage,
current, temperature, and other critical parameters in
Li-Ion or Li-Polymer batteries, and reports the
information to the system host controller over an
SMBus 1.1 compatible interface.
Low Power Consumption Sleep Mode: < 69 μA
High-Accuracy Analog Front End With Two
Independent ADCs
–
High-Resolution, 15~22-bit Integrator for
Coulomb Counting
–
16-Bit Delta-Sigma ADC With a 16-Channel
Multiplexer for Voltage, Current, and
Temperature
The bq3060 provides software-1st level and 2nd level
safety protection on overvoltage, undervoltage,
overtemperature, and overcharge, as well as
hardware-overcurrent in discharge, short circuit in
charge and discharge protection.
•
Ultra Compact Package: 24-Pin TSSOP PW
Table 1. ORDERING INFORMATION
AVAILABLE OPTIONS
PACKAGE TSSOP
(PW)
Standard
bq3060PW(1)
(1) The bq3060 can be ordered in tape and reel by adding the suffix R to the orderable part number, i.e.,
bq3060PWR.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated