BQ2980, BQ2982
SLUSCS3H – OCTOBER 2017 – REVISED JULY 2021
BQ298xyz Voltage, Current, Temperature Protectors with an Integrated High-Side
NFET Driver for Fast/Flash Charging Single-Cell Li-Ion and Li-Polymer Batteries
1 Features
3 Description
•
Voltage protection:
The BQ298xyz family of devices, featuring integrated
charge-pump FET drivers, provides high-side primary
battery cell protection for 1-series Li-ion and Li-
Polymer batteries, enabling consistent Rdson across
cell voltages. For better system thermal performance,
the BQ298x device's accuracy enables the use of a
sense resistor as low as 1 mΩ.
– Overvoltage (OV): ±10 mV
– Undervoltage (UV): ±20 mV
Current protection
– Overcurrent in charge (OCC): ±1 mV
– Overcurrent in discharge (OCD): ±1 mV
– Short circuit in discharge (SCD): ±5 mV
Temperature protection:
– Overtemperature (OT)
Additional features:
– Supports as low as a 1-mΩ sense resistor
•
•
•
The CTR pin in the BQ298x device can be configured
to override the FET driver by host control to create a
system reset or shutdown function. Alternatively, the
CTR pin can be configured to connect an external
Positive Temperature Coefficient (PTC) thermistor for
FET OT protection in addition to the internal die
temperature sensor. The BQ2980xy devices support
zero-volt (0-V) charging, while the BQ2982xy devices
have this disabled.
(RSNS
)
– High-side protection
– High Vgs FET drive
– 0-V charging (only BQ2980)
– CTR pin for FET override control for system
reset/shutdown
– Configure CTR for second OT protection
through an external PTC thermistor
Current consumption:
– NORMAL mode: 4 µA
– SHUTDOWN mode: 0.1-µA maximum
Package:
Device Information
PART
PACKAGE
BODY SIZE (NOM)
NUMBER(1)
•
•
BQ2980xy
X2QFN
X2QFN
1.50 mm × 1.50 mm × 0.37 mm
1.50 mm × 1.50 mm × 0.37 mm
BQ2982xy
(1) For all available packages, see the orderable addendum and
Device Comparison Table.
– 8-pin X2QFN: 1.50 × 1.50 × 0.37 mm
PACK+
2 Applications
Option to configure for PTC protection
R
VDD
R
BAT
R
PACK
•
•
•
•
Smartphones
Tablets
Power bank
Wearables
CTR
VSS
BAT
CHG
VDD
VSS
CS
DSG
PACK
CTR
PACK–
R
CTR
System
Reset
C
VDD
Scale RC values for
system reset timing
PACK–
R
SNS
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.