5秒后页面跳转
BQ296203DSGT PDF预览

BQ296203DSGT

更新时间: 2024-10-28 11:08:03
品牌 Logo 应用领域
德州仪器 - TI 电池光电二极管
页数 文件大小 规格书
31页 2647K
描述
适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40 to 110

BQ296203DSGT 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active包装说明:HVSON, SOLCC8,.08,20
Reach Compliance Code:compliant风险等级:1.61
其他特性:OVER VOLTAGE AND UNDER VOLTAGE THRESHOLD ARE 4.5 AND 2.5V可调阈值:NO
模拟集成电路 - 其他类型:POWER SUPPLY SUPPORT CIRCUITJESD-30 代码:S-PDSO-N8
JESD-609代码:e4长度:2 mm
湿度敏感等级:2信道数量:4
功能数量:1端子数量:8
最高工作温度:110 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:HVSON
封装等效代码:SOLCC8,.08,20封装形状:SQUARE
封装形式:SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
座面最大高度:0.8 mm最大供电电流 (Isup):0.008 mA
最大供电电压 (Vsup):20 V最小供电电压 (Vsup):3 V
标称供电电压 (Vsup):14.4 V表面贴装:YES
温度等级:INDUSTRIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:NO LEAD端子节距:0.5 mm
端子位置:DUAL阈值电压标称:4.5
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:2 mm
Base Number Matches:1

BQ296203DSGT 数据手册

 浏览型号BQ296203DSGT的Datasheet PDF文件第2页浏览型号BQ296203DSGT的Datasheet PDF文件第3页浏览型号BQ296203DSGT的Datasheet PDF文件第4页浏览型号BQ296203DSGT的Datasheet PDF文件第5页浏览型号BQ296203DSGT的Datasheet PDF文件第6页浏览型号BQ296203DSGT的Datasheet PDF文件第7页 
BQ2961, BQ2962  
SLUSBU5P – NOVEMBER 2013 – REVISED AUGUST 2021  
BQ296xxx Overvoltage Protection for 2-Series, 3-Series, and 4-Series Cell  
Li-Ion Batteries with Regulated Output Supply  
1 Features  
3 Description  
2-series, 3-series, and 4-series cell overvoltage  
protection (OVP)  
Fixed delay timer to trigger FET drive output  
(3-s, 4-s, 5.5-s, or 6.5-s options)  
Factory programmed OVP threshold (threshold  
range 3.85 V to 4.6 V)  
Output options: active high  
High-accuracy overvoltage protection:  
±10 mV  
The BQ296xxx family is a high-accuracy, low-power  
overvoltage protector with a 2-mA regulated output  
supply for Li-ion battery pack applications.  
Each cell in a 2-series to 4-series cell stack is  
individually monitored for an overvoltage condition. An  
internally fixed-delay timer is initiated upon detection  
of an overvoltage condition on any cell. Upon  
expiration of the delay timer, an output pin is triggered  
into an active state to indicate that an overvoltage  
condition has occurred.  
Regulated supply output with self-disable and/or  
external enable/disable control  
The regulated output supply delivers up to 2-mA  
(max) output current to drive always-on circuits, such  
as a real-time clock (RTC) oscillator. The BQ296xxx  
family has a self-disable function to turn off the  
regulated output if any cell voltage falls below a  
certain threshold, thereby preventing drain on the  
battery, and provides an external control to enable or  
disable the regulated output.  
– Options: 3.3 V, 2.5 V, and 1.8 V (BQ2961)  
– Options: 3.3 V, 3.15 V, 3.0 V (BQ2962)  
Low power consumption ICC ~ 4 µA  
(VCELL(ALL) < VPROTECT  
)
Extra low power consumption with reg output  
disabled, ICC ~ 1.2 µA  
Low leakage current per cell input < 100 nA  
Small package footprint  
– 8-Pin WSON (2 mm × 2 mm)  
Device Information  
PART NUMBER(1)  
BQ2961  
PACKAGE  
BODY SIZE (NOM)  
2 Applications  
Notebook PC  
Ultrabooks  
Medical  
WSON (8)  
2.00 mm × 2.00 mm  
BQ2962  
(1) For all available packages, see the orderable addendum at  
the end of the data sheet.  
UPS battery backup  
Pack +  
Protector  
FETs  
100 Ω  
OUT  
REG  
VDD  
V4  
External  
Circuit  
e.g., RTC  
1 kΩ  
5 (*)  
0.1µF  
0.1µF  
0.1µF  
VCELL4  
VCELL3  
1 kΩ  
1 kΩ  
V3  
V2  
VSS  
V1  
* can be removed if Vss will be  
connected first during cell  
connection  
PWPD  
VCELL2  
VCELL1  
1 kΩ  
0.1µF  
0.47 µF  
0.1µF  
Pack œ  
Simplified Schematic  
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,  
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION  
DATA.  
 
 
 

BQ296203DSGT 替代型号

型号 品牌 替代类型 描述 数据表
BQ296203DSGR TI

完全替代

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40

与BQ296203DSGT相关器件

型号 品牌 获取价格 描述 数据表
BQ296212DSGR TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296212DSGT TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296213DSGR TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296213DSGT TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296215DSGR TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296215DSGT TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296216DSGR TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296216DSGT TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296217DSGR TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40
BQ296217DSGT TI

获取价格

适用于 2 节、3 节和 4 节串联锂离子电池的过压保护 | DSG | 8 | -40