bq27441-G1
www.ti.com
SLUSBH1A –NOVEMBER 2013–REVISED JANUARY 2014
System-Side Impedance Track™ Fuel Gauge
Check for Samples: bq27441-G1
1
FEATURES
APPLICATIONS
23
•
Single Series Cell Li-Ion Battery Fuel Gauge
•
•
•
•
Smartphones, Feature Phones and Tablets
Digital Still and Video Cameras
Handheld Terminals
–
–
Resides on System Board
Supports Embedded or Removable
Batteries
MP3 or Multimedia Players
–
–
Powered Directly from Battery with
Integrated LDO
DESCRIPTION
The Texas Instruments bq27441-G1 is an easy to
configure microcontroller peripheral that provides
system-side fuel gauging for single-cell Li-Ion
batteries. The device requires minimal user
configuration and system microcontroller firmware
development.
Supports a Low-Value External Sense
Resistor (10mΩ)
•
Easy to Configure Fuel Gauging Based on
Patented Impedance Track™ Technology
–
Reports Remaining Capacity and State of
Charge (SOC) with Smoothing Filter
The bq27441-G1 uses the patented Impedance
Track™ algorithm for fuel gauging, and provides
information such as remaining battery capacity
(mAh), state-of-charge (%), and battery voltage (mV).
–
Automatically Adjusts for Battery Aging,
Self-discharge, Temperature, and Rate
Changes
–
Battery State of Health (Aging) Estimation
Battery fuel gauging with the bq27441-G1 requires
connections only to PACK+ (P+) and PACK– (P–) for
a removable battery pack or embedded battery
circuit. The tiny 12-pin 2.5 mm × 4 mm SON package
is ideal for space constrained applications.
•
•
Microcontroller Peripheral Supports:
–
–
400-kHz I2C™ Serial Interface
Configurable SOC Interrupt, or
Battery Low Digital Output Warning
–
Internal Temperature Sensor, or
Host Reported Temperature
Small 12-pin 2.5 mm × 4 mm SON Package
TYPICAL APPLICATION
SRN
SCL
I2C
VSYS
Coulomb
Counter
SDA
Bus
SRP
BAT
CPU
Battery Pack
GPOUT
BIN
PACKP
ADC
Li-Ion
Cell
T
Protection
IC
VDD
VSS
0.47uF
1.8V
LDO
bq27441
PACKN
NFET NFET
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Impedance Track is a trademark of Texas Instruments.
2
3
I2C is a trademark of NXP B.V. Corp Netherlands.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013–2014, Texas Instruments Incorporated