bq24721
bq24721C
www.ti.com.................................................................................................................................................. SLUS683F–NOVEMBER 2005–REVISED APRIL 2009
ADVANCED MULTI-CHEMISTRY AND MULTI-CELL SYNCHRONOUS SWITCH-MODE
CHARGER AND SYSTEM POWER SELECTOR
1
FEATURES
APPLICATIONS
•
•
•
Portable Notebook Computers
Portable DVD Players
Webpads, PC Tablets
2
•
High Efficiency NMOS-NMOS Synchronous
Buck Converter With User-Selectable 300 kHz
or 500 kHz frequency
•
•
•
bq24721C Offers Softer Turn-On, Stronger
Turn-Off
SBS-Like(1) SMBus Interface for Control and
Status Communications With Host
DESCRIPTION
The bq24721 is a high efficiency synchronous battery
pack charger with high level of integration for portable
applications. This device implements
performance analog front-end that interfaces to the
system power management micro-controller through
a simplified SBS-like SMBus interface.
a
high
Programmable Battery Voltage, Charge
Current, and AC Adapter Current via SBS-Like
SMBus Interface
•
•
•
0.4% Charge Voltage Regulation Accuracy
3% Charge Current Regulation Accuracy
The dynamic power management (DPM) function
modifies the charge current depending on system
load conditions, avoiding ac adapter overload.
3% Adapter Current Regulation Accuracy
Dynamic Power Management (DPM)
High accuracy current sense amplifiers enable
accurate measurement of either the charge current or
the ac adapter current, allowing termination of
nonsmart packs and monitoring of overall system
power.
•
•
•
2% Accuracy Integrated Charge and AC
Adapter 20× Current Amplifier Output
3-Cell and 4-Cell Li-Ion Voltage Regulation
9 V, 12 V–14.4 V, 16 V–19.2 V
Battery Pack Voltage Operating Range
0 V–19.2 V
The adapter isolation diode can be bypassed or
entirely replaced with an external MOSFET using a
control signal provided by the bq24721, thus reducing
overall power dissipation.
•
•
•
•
AC Adapter Operating Range 8 V–28 V
99.5% Max Duty Cycle
Integrated features such as charger soft start, charge
overcurrent protection, and IC temperature monitoring
provide a second level of protection, in addition to
pack and system protection functions.
Internal Soft Start
Integrated 5% 5-V LDO When AC Adapter
Applied
•
•
•
6-V Drive Supply Voltage for Increased
Efficiency
5x5 QFN PACKAGE (TOP VIEW)
Reverse Battery to Adapter Discharge
Protection
1
2
24
23
22
21
20
19
CHGEN
BATDRV
SYS
Battery/Adapter to System Power Selector
Function
ACDRV
ACN
3
4
5
6
7
8
SYNP
SYNN
SRP
•
•
•
Charge and Adapter Overcurrent Protection
Battery Thermistor Sense, TS, Comparators
Available in 32-Pin 5x5-mm QFN Package
ACP
bq24721,
bq24721C
ACDET
SRN
BYPASS
EAO
18 BAT
(1) SBS-Like interface is not 100% SBS compliant. SBS-Like
interface is SMBus1.1 complaint but does not support Packet Error
Correction (PEC). The control and status registers were changed
to simplify and enhance notebook charger control. An 8-bit address
(0x12) is used. See Table 1 for a comparison between SBS-like vs
SBS Specification.
17
EAI
IOUT
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2009, Texas Instruments Incorporated