bq24257
bq24258
www.ti.com
SLUSBG0B –FEBRUARY 2013–REVISED JULY 2013
2A Single Input I2C, Standalone Switch-Mode Li-Ion Battery Charger with Integrated
Current Sense Resistor
Check for Samples: bq24257, bq24258
1
FEATURES
234
•
High-efficiency Switch-mode Charger with
Integrated Current Sense Resistor
•
•
•
Watchdog Timer with Disable Bit
Integrated 4.9 V, 50 mA LDO
•
BC1.2 D+, D– Detection with Dead Battery
Provision (DBP) Pin to Sync with External
USB-PHI
Complete System Level Protection
–
Input UVLO, Input Overvoltage Protection
(OVP), Battery OVP, Sleep Mode, VIN_DPM
•
•
USB Charging Compliant
–
–
–
–
Input Current Limit
Selectable Input Current Limit of 100 mA,
150 mA, 500 mA, 900 mA. 1.5 A, and 2 A
In Host Mode (after I2C™ Communication and
Before Watchdog Timer Times Out)
Charge Current Limit
Thermal Regulation and Thermal Shutdown
•
Voltage Based, JEITA Compatible NTC
Monitoring Input
–
Programmable Battery Charge Voltage
(VBATREG
Programmable Battery Charge Current
(ICHG
–
Safety Timer
)
•
•
•
20 V Maximum Input Voltage Rating
–
10.5 V Maximum Operating Input Voltage
)
Low RDS(on) Integrated Sense Resistor for up to
2 A Charging Rate
–
–
Programmable Input Current Limit (ILIM
)
Programmable Input Voltage Based
•
•
Open Drain Status Outputs
Dynamic Power Management Threshold
(VIN_DPM
Programmable Input Overvoltage
Protection Threshold (VOVP
Programmable Safety Timer.
)
Synchronous Fixed-frequency PWM Controller
Operating at 3 MHz for Small Inductor Support
–
–
)
•
•
AnyBoot Robust Battery Detection Algorithm
Charge Time Optimizer for Improved Charge
Times at any Given Charge Current
•
In Standalone Mode (before I2C™
Communication and After Watchdog Timer
Times Out)
APPLICATIONS
•
•
•
•
Mobile Phones, Smart Phones
MP3 Players
–
–
–
Resistor Programmable ICHG up to 2 A With
Current Monitoring Output (ISET
Resistor Programmable ILIM up to 2 A With
Current Monitoring Output (ILIM
Resistor Programmable VIN_DPM (VDPM)
)
Handheld Devices
)
Portable Media Player
DESCRIPTION
The bq2425x is a highly integrated single-cell Li-Ion battery charger with integrated current sense resistor
targeted for space-limited, portable applications with high capacity batteries. The single cell charger has a single
input that operates from either a USB port or AC wall adapter for a versatile solution. BC1.2 compatible D+, D-
detection allows for recognition of CDP, DCP, SDP, and non-standard USB adapters. The use of an accessory
dead battery provision (DBP) pin allows for the system to sync a dead battery state in order to enable or disable
the BC1.2 detection in the event of an external USB-PHI.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
4
NanoFree is a trademark of Texas Instruments.
I2C is a trademark of NXP B.V. Corporation.
All other trademarks are the property of their respective owners.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated