Datasheet > 电源电路 > 电源管理电路> BQ2031SN-A5

BQ2031SN-A5

更新时间： 2024-10-27 23:35:35

品牌	Logo	应用领域
德州仪器 - TI		电源电路电源管理电路光电二极管
页数	文件大小	规格书
16页	169K
描述
IC-SMD-PROG.BATTERY CHARGER

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

BQ2031SN-A5 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	SOIC
包装说明：	SOP,	针数：	16
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	1 week
风险等级：	0.71	模拟集成电路 - 其他类型：	BATTERY CHARGE CONTROLLER
控制模式：	CURRENT-MODE	控制技术：	PULSE WIDTH MODULATION
最大输入电压：	5.5 V	最小输入电压：	4.5 V
标称输入电压：	5 V	JESD-30 代码：	R-PDSO-G16
JESD-609代码：	e4	长度：	9.97 mm
湿度敏感等级：	1	功能数量：	1
端子数量：	16	最高工作温度：	70 °C
最低工作温度：	-20 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	260
认证状态：	Not Qualified	座面最大高度：	1.78 mm
表面贴装：	YES	切换器配置：	SINGLE
最大切换频率：	100 kHz	温度等级：	OTHER
端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	3.935 mm
Base Number Matches：	1

BQ2031SN-A5 数据手册

bq2031

Lead-Acid Fast-Charge IC

charging until the voltage rises into

- ^{Ideal for high-efficiency}

Features

➤ Conforms to battery manufactur-

ers' charge recommendations for

cyclic and float charge

the allowed range or an internal

timer runs out and places the

bq2031 in a Fault condition. This

procedure prevents high-current

charging of cells that are possibly

damaged or reversed. Charging is

inhibited anytime the temperature

of the battery is outside the config-

urable, allowed range. All voltage

thresholds are temperature-

compensated.

switch-mode power conversion

- ^{Configurable for linear or}

gated current use

➤ Direct LED control outputs dis-

play charge status and fault con-

ditions

➤ Pin-selectable charge algorithms

- ^{Two-Step Voltage with}

temperature-compensated

constant-voltage maintenance

General Description

- ^{Two-Step Current with}

constant-rate pulsed current

maintenance

The bq2031 Lead-Acid Fast Charge

IC is designed to optimize charging

of lead-acid chemistry batteries. A

flexible pulse-width modulation

regulator allows the bq2031 to con-

trol constant-voltage, constant-

current, or pulsed-current charging.

The regulator frequency is set by an

external capacitor for design flexi-

bility. The switch-mode design keeps

power dissipation to a minimum for

high charge current applications.

The bq2031 terminates fast (bulk)

charging based on the following:

- ^{Pulsed Current: hysteretic,}

on-demand pulsed current

ꢀ

Maximum voltage

➤ Pin-selectable charge termination

by maximum voltage,∆²V, mini-

mum current, and maximum

time

ꢀ

Second difference of cell voltage

(∆²V)

ꢀ

Minimum current (in constant-

voltage charging)

➤ Pre-charge qualification detects

shorted, opened, or damaged cells

and conditions battery

Maximum time-out (MTO)

After bulk charging, the bq2031 pro-

vides temperature-compensated

maintenance (float) charging to

maintain battery capacity.

A charge cycle begins when power is

applied or the battery is replaced.

For safety, charging is inhibited un-

til the battery voltage is within con-

figured limits. If the battery voltage is

less than the low-voltage threshold,

the bq2031 provides trickle-current

➤ Charging continuously qualified by

temperature and voltage limits

➤ Internal temperature-compen-

sated voltage reference

➤ Pulse-width modulation control

Pin Connections

Pin Names

LED₃/

QSEL

Charge status output 3/

Charge algorithm select

input 1

TMTO

FLOAT

BAT

Time-out timebase input

State control output

TMTO

FLOAT

BAT

LED /DSEL

LED /TSEL

COM

V_SS

Common LED output

System ground

Battery voltage input

Voltage loop comp input

Current loop comp input

Current gain select input

Sense resistor input

MOD

VCOMP

ICOMP

IGSEL

SNS

VCOMP

ICOMP

IGSEL

V_CC

5.0V 10% power

MOD

Modulation control

output

COM

SNS

LED /QSEL

LED₁/

TSEL

Charge status output 1/

Charge algorithm select

input 2

TPWM

Temperature sense input

Regulator timebase input

TPWM

16-Pin Narrow

DIP or SOIC

LED₂/

DSEL

Charge status output 2/

Display select input

PN203101.eps

SLUS156–JUNE 1999 E

12 3 4 5 6 7...16

中文翻译

下载PDF

BQ2031SN-A5 替代型号

型号	品牌	替代类型	描述	数据表
BQ2031SN-A5TR	TI	类似代替	Lead-Acid Fast-Charge IC

与BQ2031SN-A5相关器件

型号	品牌	获取价格	描述	数据表
BQ2031SN-A5G4	TI	获取价格	Lead-Acid Fast-Charge IC
BQ2031SN-A5TR	TI	获取价格	Lead-Acid Fast-Charge IC
BQ2031SN-A5TRG4	TI	获取价格	Lead-Acid Fast-Charge IC
BQ2040	TI	获取价格	Gas Gauge IC With SMBus Interface
BQ2040SN	TI	获取价格	Gas Gauge IC With SMBus Interface
BQ2040SN-C408	TI	获取价格	Gas Gauge IC With SMBus Interface
BQ2040SN-C408TR	TI	获取价格	Gas Gauge IC With SMBus Interface
BQ2040SN-C408TRG4	TI	获取价格	1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16, GREEN, SOIC-16
BQ2040SN-D111	TI	获取价格	Gas Gauge IC With SMBus Interface
BQ2040SN-D111TR	TI	获取价格	Gas Gauge IC With SMBus Interface

与BQ2031SN-A5相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

13
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

13
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

40
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

47

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ2031SN-A5

BQ2031SN-A5 技术参数

BQ2031SN-A5 数据手册

BQ2031SN-A5 替代型号

与BQ2031SN-A5相关器件

与BQ2031SN-A5相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ2031SN-A5

BQ2031SN-A5 技术参数

BQ2031SN-A5 数据手册

BQ2031SN-A5 替代型号

与BQ2031SN-A5相关器件

与BQ2031SN-A5相关文章

您还可以找

您在本页遇到什么问题？