Datasheet > 暂无类别数据> BQ2013HSN-A514

BQ2013HSN-A514

更新时间： 2024-10-27 22:29:15

品牌	Logo	应用领域
德州仪器 - TI		仪表
页数	文件大小	规格书
24页	194K
描述
Gas Gauge IC for Power- Assist Applications

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

BQ2013HSN-A514 数据手册

bq2013H

Gas Gauge IC for Power-

Assist Applications

Features

General Description

Nominal available charge may be

directly indicated using a five-seg-

ment LED display. These segments

are used to graphically indicate

nominal available charge.

➤ Accurate measurement of available

The bq2013H Gas Gauge IC is in-

tended for battery-pack installation to

maintain an accurate record of a bat-

tery’s available charge. The IC moni-

tors a voltage drop across a sense resis-

tor connected in series between the

negative battery terminal and ground

to determine charge and discharge ac-

tivity of the battery. The bq2013H is

designed for high cpaacity battery

packs used in high-discharge rate sys-

tems.

charge in rechargeable batteries

➤ Designed for electric assist bicycles

and other applications

The bq2013H supports a simple

single-line bi-directional serial link to

an external processor (common

ground). The bq2013H outputs bat-

tery information in response to exter-

nal commands over the serial link. To

support battery pack testing, the

outputs may also be controlled by

command. The external processor

may also overwrite some of the

bq2013H gas gauge data registers.

➤ Measures a wide dynamic current

range

➤ Supports NiCd, NiMH or lead acid

➤ Designed for battery pack inte-

gration

- ¹²⁰µA typical standby current

(self-discharge estimation mode)

Battery self-discharge is estimated

based on an internal timer and tem-

perature sensor. Compensations for

battery temperature, rate of charge,

and self-discharge are applied to the

charge counter to provide available

capacity information across a wide

range of operating conditions. Initial

battery capacity, self-discharge rate,

display mode, and charge compensa-

tion are set using the PROG_1-6pins.

Actual battery capacity is automati-

cally “learned” in the course of a dis-

charge cycle from full to empty.

- ^{Small size enables imple-}

mentations in as little as

square inch of PCB

The bq2013H may operate directly

from four nickel cells or three lead

acid. With the REF output and an

external transistor, a simple, inexpen-

sive regulator can be built to provide

➤ Direct drive of LEDs for capacity

display

➤ Automatic charge and self-

discharge compensation using in-

ternal temperature sensor

V_CCfrom a greater number of cells.

➤ Simple single-wire serial commu-

nications port for subassembly

testing

Internal registers include available

charge, temperature, capacity, battery

ID, and battery status.

➤ 16-pin narrow SOIC

Pin Connections

Pin Names

LCOM

LED common output

REF

Voltage reference output

LCOM

SEG₁/PROG₁LED segment 1/ Program

1 input

DONE

Fast charge complete

input

SEG /PROG

REF

DONE

HDQ

RBI

SEG /PROG

SEG₂/PROG₂LED segment 2 / Program

2 input

HDQ

Serial communications

input/output

SEG /PROG

SEG₃/PROG₃LED segment 3/ Program

3 input

RBI

Battery sense input

Display control input

Sense resistor input

Supply voltage

SEG PROG

PROG

DISP

SEG₄/PROG₄LED segment 4/ Program

4 input

DISP

SEG₅/PROG₅LED segment 5/ Program

5 input

16-Pin Narrow SOIC

PN2013.eps

V_CC

PROG₆

Program 6 input

SLUS120–MAY 1999 B

12 3 4 5 6 7...24

中文翻译

下载PDF

BQ2013HSN-A514 替代型号

型号	品牌	替代类型	描述	数据表
BQ2014HSN	TI	完全替代	Low-Cost NiCd/NiMH Gas Gauge IC
BQ2050HSN-A508	TI	完全替代	Low-Cost Lithium Ion Power Gauge IC

与BQ2013HSN-A514相关器件

型号	品牌	获取价格	描述	数据表
BQ2013HSN-A514G4	TI	获取价格	Gas Gauge IC for Power- Assist Applications
BQ2013HSN-A514TR	TI	获取价格	Gas Gauge IC for Power- Assist Applications
BQ2013HSN-A514TRG4	TI	获取价格	Gas Gauge IC for Power- Assist Applications
BQ2014	TI	获取价格	Gas Gauge IC with External Charge Control
BQ2014H	TI	获取价格	Low-Cost NiCd/NiMH Gas Gauge IC
BQ2014HSN	TI	获取价格	Low-Cost NiCd/NiMH Gas Gauge IC
BQ2014HSN-A309	TI	获取价格	Low-Cost NiCd/NiMH Gas Gauge IC
BQ2014HSNG4	TI	获取价格	NiCd/NiMH Gas Gauge With High-Speed 1-Wire (HDQ) Interface And 5 LED Drivers 16-SOIC 0 to
BQ2014HSNTR	TI	获取价格	具有高速单总线 (HDQ) 接口和 5 个 LED 驱动器的镍镉电池/镍氢电池电量监测计
BQ2014PN	ETC	获取价格	Battery Management

与BQ2013HSN-A514相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

13
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

13
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

39
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

46

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ2013HSN-A514

BQ2013HSN-A514 数据手册

BQ2013HSN-A514 替代型号

与BQ2013HSN-A514相关器件

与BQ2013HSN-A514相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BQ2013HSN-A514

BQ2013HSN-A514 数据手册

BQ2013HSN-A514 替代型号

与BQ2013HSN-A514相关器件

与BQ2013HSN-A514相关文章

您还可以找

您在本页遇到什么问题？