Applicable standard
Operating
Storage
-40 °C to +85 °C ( 95 %RH Max.)
-40 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
75 Ω( 0 to 12 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
X
X
X
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 8 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 8 mΩ Max.
1000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 3 GHz.
Frequency 3 to 12 GHz.
Frequency - to - GHz.
No flashover or breakdown.
VSWR 1.29 Max.( 18 dB Min)
VSWR 1.43 Max.( 15 dB Min)
--- dB Max.
X
-
-
Insertion loss
-
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ 1.32-0.005 by steel gauge.
Insertion force
Extraction force 0.6 N Min.
Insertion force --- N Max.
--- N Max.
-
X
-
-
-
-
Measured by applicable connector.
5000 times insertion and extractions.
-
-
extraction forces
Mechanical operation
Extraction force --- N Min.
1)Contact resistance:
Center contact 12 mΩ Max.
Outer contact 12 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 96 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
X
X
-
-
Rapid change of
temperature
Temperature
Time
-40 → - → +85 → - °C
30 → 3 → 30 → 3 min.
Under 5 cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
VSWR
1.29 Max. (Frequency 0 ~ 3 GHz.)
1.43 Max. (Frequency 3 ~12 GHz.)
1.29 Max. (Frequency 0 ~ 3 GHz.)
1.43 Max. (Frequency 3 ~12 GHz.)
Checked
X
X
-
-
VSWR
VSWR
Resistance to
soldering heat
Solder iron metheod) Temperature : 380℃
Application time : 5 Sec.
VSWR
Count
Description of revisions
Designed
Date
0
△
TO.KATAYAMA
Approved
18.03.05
18.03.05
18.03.05
18.03.05
Remark
RoHS COMPLIANT
TO.KATAYAMA
MA.SAEKI
Checked
Designed
Drawn
MA.SAEKI
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-368216-01-00
SPECIFICATION SHEET
BNC(75)-BLR-PC-12G(01)
0
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL302-0081-0-01
FORM HD0011-2-1