Datasheet
AC/DC Convertor IC
Non-isolated Type PWM DC/DC Converter IC
Built-in Switching MOSFET
BM2P181S-Z
General Description
Key Specifications
The PWM type DC/DC converter for AC/DC provides
an optimum system for all products that include an
electrical outlet. It enables simpler design of a high
effective converter specializing in non-isolation.
By a built-in startup circuit that tolerates 650 V, this IC
contributes to low power consumption. A current
detection resistor as internal device realizes the small
power supply designs. Since a current mode control is
utilized, the current can be restricted in each cycle and
an excellent performance is demonstrated in the
bandwidth and transient response. The switching
frequency is fixed to 25 kHz. A frequency hopping
function is also on chip, and it contributes to low EMI. In
addition, a built-in super junction MOSFET which
tolerates 650 V makes the design easy.
◼ Power Supply Voltage Range
DRAIN Pin:
◼ Current at Switching Operation:
◼ Current at Burst Operation:
◼ Switching Frequency:
650 V (Max)
500 µA (Typ)
350 µA (Typ)
25 kHz (Typ)
◼ Operation Temperature Range: -40 °C to +105 °C
◼ MOSFET ON Resistor: 1.5 Ω (Typ)
Package
W (Typ) x D (Typ) x H (Max)
9.27 mm x 6.35 mm x 8.63 mm
pitch 2.54 mm
DIP7K
Features
◼ PWM Current Mode Method
◼ Frequency Hopping Function
◼ Burst Operation at Light Load
◼ Built-in 650 V Startup Circuit
◼ Built-in 650 V Super Junction MOSFET
◼ VCC UVLO (Under Voltage Lockout)
◼ VCC OVP (Over Voltage Protection)
◼ Over Current Detection Function per Cycle
◼ Soft Start Function
Applications
Household Appliances such as LED Lights,
Air-conditioners and Cleaners
Typical Application Circuit
VCC
GND_IC
VOUT
DRAIN
DRAIN
AC
Input
Filter
GND
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2019 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0F1F0A200650-1-2
29.May.2023 Rev.001
1/28