APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
-35 C TO 85 C (NOTE 1)
50 V AC/DC
TEMPERATURE RANGE
-10 C TO 60 C
VOLTAGE
RATING
SIGNAL CONTACT : 0.3 A
POWER CONTACT : 4.0 A
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE 20 mV AC OR LESS 1kHz, 1 mA .
SIGNAL CONTACT RESISTANCE: 50 m MAX.
POWER CONTACT RESISTANCE: 30 m MAX.
-
X
INSULATION
100 V DC.
-
-
100M MIN.
X
X
RESISTANCE
VOLTAGE PROOF
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
10 TIMES INSERTIONS AND EXTRACTIONS.
① SIGNAL CONTACT RESISTANCE: 50 m MAX.
POWER CONTACT RESISTANCE: 30 m MAX.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
-
X
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10 Hz ,APPROX 5min,
SINGLE AMPLITUDE 0.75 mm,10 CYCLES,
FOR 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 1 s.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
-
-
X
X
① NO ELECTRICAL DISCONTINUITY OF 1 s.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55 → +85℃
① SIGNAL CONTACT RESISTANCE: 50 m MAX.
POWER CONTACT RESISTANCE: 30 m MAX.
② INSULATION RESISTANCE: 100M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
-
-
-
X
X
X
TIME
30 → 30 min
UNDER 5 CYCLES.
(RELOCATION TIME TO CHAMBER : WITHIN 2-3 min)
DAMP HEAT
EXPOSED AT 40 ± 2 C, 90 TO 95 , 96 h.
① SIGNAL CONTACT RESISTANCE: 50 m MAX.
POWER CONTACT RESISTANCE: 30 m MAX.
② INSULATION RESISTANCE: 50M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
(STEADY STATE)
SULPHUR DIOXIDE
EXPOSED IN 25 PPM FOR 96h,25℃,75%.
① SIGNAL CONTACT RESISTANCE: 50 m MAX.
POWER CONTACT RESISTANCE: 30 m MAX.
② NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARKS
APPROVED
CHECKED
DESIGNED
DRAWN
WR.FUKUCHI
20201225
20201225
20201225
20201225
NOTE 1 : INCLUDE THE TEMPERATURE RISING BY CURRENT
TS.MIYAZAKI
RH.KITAGAWA
DS.HIROWATARI
Unless otherwise specified, refer to JIS C 5402 and IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-345876-78-01
BM22-6S-V(78)
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL0677-1004-1-78
FORM HD0011-2-1