Max.2A Li-ion Switching Charger IC
DESCRIPTION
FEATURES
The BL8578 is a 2A Li-Ion battery switching
charger intended for 5V adapters. Low power
dissipation, an internal MOSFET and its compact
package with minimum external components
requirement makes the BL8578 ideal for portable
applications. The BL8578 includes complete
charge termination circuitry, automatic recharge
and a ±1% 4.2V/4.35V float voltage.
Very Low Power Dissipation
2A Maximum Charge Current
Standalone Capability with no Requirement
of External MOSFET, Sense Resistor or
Blocking Diode
Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly
from USB Port
Drainage Charge Current Thermal Regulation
Status Outputs for LED or System Interface
Preset 4.2V/4.35V float Voltage with ±1%
Accuracy
External sense resistor and Reverse diode is not
need. Build-in thermal feedback mechanism
regulates the charge current to control the die
temperature during high power operation or at
elevated ambient temperature.
Automatic Recharge
Available in DFN3x3-10L Package
RoHS Compliant and 100% Lead (Pb)-Free
Battery charge current, charge timeout and end-
of-charge indication parameters can program by
external components. Additional features include
shorted cell detection and overvoltage protection.
APPLICATIONS
Cellular Telephones, PDA, MP3 Players
Charging Docks and Cradles
Handheld Battery-Powered Devices
Handheld Computers
The BL8578 is available in DFN3x3-10L package.
TYPICAL APPLICATION
PIN OUT & MARKING
C4
68pF
1uH
L1
CHRG
ISET
Ctrl
EN
BAT
CHRIN
GND
SW
CHRG
ISET
Ctrl
EN
BAT
CHRIN
GND
SW
5V USB
Input
To 4.2V
Li-Ion Battery
SW
VIN
Ctrl
BAT
LC6101
BL8578
R2
120K
CHRIN
FB
VIN
FB
VIN
C1
10uF
FB
10k
R4
C2
10uF
ISET
R3
75K
RISET
330
4.2V
4.35V
C3
EN
CHRG
10uF
GND
OFF
ON
DFN3x3-10L
BG: Product Code
Device parameter should be select as typical application
LL: LOT NO. H: FAB Code
YW: Date code (Year & Week)
www.belling.com.cn
1