COUNT
COUNT
CHKD
DESCRIPTION OF REVISIONS
RE-6-3066
CHKD
YJM JHW
DATE
DESCRIPTION OF REVISIONS
DATE
BY
BY
1
23.02.23
2
APPLICABLE STANDARD
OPERATING TEMPERATURE
RANGE
STORAGE
TEMPERATURE RANGE
-55℃ TO +85℃(note1)
30 V AC/DC
-10℃ TO +60℃
VOLTAGE
APPLICABLE CONNECTOR
BK35G06-56DS4-0.35V(***)
RATING
SIGNAL CONTACT 0.3A
POWER CONTACT 2.5A
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
ACCORDING TO DRAWING.
CONFIRMED VISUALLY AND BY MEASURING
INSTRUMENT.
GENERAL EXAMINATION
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
50MΩ MIN
CONTACT RESISTANCE
20mV AC OR LESS 1kHz, 1mA
X
-
INSULATION RESISTANCE
VOLTAGE PROOF
100V DC
X
X
-
-
100V AC FOR 1min.
Frequency 0~5 GHz
Frequency 5~10 GHz
Frequency 10~20 GHz
Frequency 20~40 GHz
NO FLASHOVER OR BREAKDOWN
VSWR 1.3 Max
VSWR 1.4 Max
Voltage Standing Wave
Ratio
X
-
-
VSWR 1.5 Max
VSWR 1.8 Max
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
① CONTACT RESISTANCE:
10 TIMES INSERTIONS AND EXTRACTIONS.
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
② NO DAMAGE, CRACK OR LOOSENESS
OF PATRS.
X
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10 Hz, APPROX 5min
SINGLE AMPLITUDE 0.75mm, 10CYCLES,
FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 1μs.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
X
X
-
-
① NO ELECTRICAL DISCONTINUITY OF 1μs.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
490 m/s² DURATION OF PULSE 11ms AT 3 TIMES
FOR 3 DIRECTIONS.
ENVITONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55 → +85℃
TIME 30 → 30 min
① CONTACT RESISTANCE:
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
② INSULATION RESISTANCE: 50MΩ MIN
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
UNDER 5 CYCLES.
(RELOCATION TIME TO CHAMBER: WITHIN2~3 MIN)
X
-
DAMP HEAT
(STEADY STATE)
① CONTACT RESISTANCE:
EXPOSED AT 40±2℃, 90 TO 95%, 96h.
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
② INSULATION RESISTANCE: 25MΩ MIN
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
X
-
-
SULPHUR DIOXIDE
① CONTACT RESISTANCE:
EXPOSED IN 25 PPM FOR 96h, 25℃, 75±5%RH.
(Test standard : JIS C 60068)
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
X
REMARKS
DRAWN
DESIGNED
CHECKED
APPROVED
RELEASED
Note 1 : INCLUDE THE TEMPERATURE RISING BY CURRENT.
ENG
22.06.14
DEPT
S.G.PARK
22.06.14
S.G.PARK
22.06.14
H.W.JO
22.06.14
H.W.JO
22.06.14
Unless otherwise specified, refer to JIS C 5402 and IEC 60512
PART NO.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
BK35G06-56DP4-0.35V(800)
1
CODE NO.(OLD)
DRAWING NO.
CODE NO.
1
1 CL 6695-0001-0-800
CL
ELC3-633711-80
1