COUNT
COUNT
10
CHKD
DESCRIPTION OF REVISIONS
RE-6-2403
CHKD
JHW
DATE
DESCRIPTION OF REVISIONS
DATE
BY
LCE
LCE
BY
21.09.13
21.12.27
1
21
RE-6-2541
2
JHW
APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
STORAGE
-55℃ TO +85℃(note1)
60 V AC/DC
-10℃ TO +60℃
TEMPERATURE RANGE
APPLICABLE
CONNECTOR
VOLTAGE
BK22C07-4DS/2-0.4V(***)
2
RATING
SIGNAL CONTACT 0.3A
POWER CONTACT 15.0A
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
ACCORDING TO DRAWING.
CONFIRMED VISUALLY AND BY MEASURING
INSTRUMENT.
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
1
1
SIGNAL CONTACT : 30mΩ MAX
POWER CONTACT : 5mΩ MAX
CONTACT RESISTANCE
20mV AC OR LESS 1kHz, 1mA
X
-
INSULATION RESISTANCE
VOLTAGE PROOF
100V DC
50MΩ MIN
X
X
-
-
150V AC FOR 1min.
2
NO FLASHOVER OR BREAKDOWN
MECHANICAL CHARACTERISTICS
MECHANICAL
① CONTACT RESISTANCE:
10 TIMES INSERTIONS AND EXTRACTIONS.
1
1
OPERATION
SIGNAL CONTACT : 30mΩ MAX
POWER CONTACT : 5mΩ MAX
X
-
② NO DAMAGE, CRACK OR LOOSENESS
OF PATRS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10 Hz, APPROX 5min
SINGLE AMPLITUDE 0.75mm, 10CYCLES,
FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 1μs.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
X
X
-
-
① NO ELECTRICAL DISCONTINUITY OF 1μs.
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
490 m/s² DURATION OF PULSE 11ms AT 3 TIMES
FOR 3 DIRECTIONS.
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55 → +85℃
TIME 30 → 30 min
① CONTACT RESISTANCE:
1
1
SIGNAL CONTACT : 30mΩ MAX
POWER CONTACT : 5mΩ MAX
UNDER 5 CYCLES.
(RELOCATION TIME TO CHAMBER: WITHIN2~3 MIN)
X
-
② INSULATION RESISTANCE:
50MΩ MIN
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
DAMP HEAT
(STEADY STATE)
① CONTACT RESISTANCE:
EXPOSED AT 40±2℃, 90 TO 95%, 96h.
SIGNAL CONTACT : 30mΩ MAX
POWER CONTACT : 5mΩ MAX
1
1
X
X
-
-
② INSULATION RESISTANCE:
25MΩ MIN
③ NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
SULPHUR DIOXIDE
① CONTACT RESISTANCE:
EXPOSED IN 25 PPM FOR 96h, 25℃, 75±5%RH.
(Test standard : JIS C 60068)
SIGNAL CONTACT : 30mΩ MAX
1
POWER CONTACT : 5mΩ MAX
1
② NO DAMAGE, CRACK OR LOOSENESS
OF PARTS.
REMARKS
DRAWN
DESIGNED
CHECKED
APPROVED
RELEASED
Note 1 : INCLUDE THE TEMPERATURE RISING BY CURRENT.
D.K.YUN
20.12.29
Note QT: QUALIFICATION TEST AT: ASSURANCE TEST X: APPLICABLE TEST
D.K.YUN
20.12.29
S.Sunaga
20.12.29
H.W.JO
Unless otherwise specified, refer to JIS C 5402 and IEC 60512
20.12.29
PART NO.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
BK22C07-4DP/2-0.4V(800)
CODE NO.(OLD)
DRAWING NO.
CODE NO.
1
ELC3-633241-08
1
CL 6677-0001-8-800