Ambient Light Sensor ICs
Analog Current Output Type
Ambient Light Sensor IC
BH1680FVC
No.12046EBT14
●Descriptions
BH1680FVC is an analog current output ambient light sensor. This IC can detect the illuminance from 0lx to 50000lx. It is the
most suitable to obtain the ambient light data for adjusting LCD and Keypad backlight of Mobile phone for power saving and
better visibility. It is suitable also for the use of optical window that the visible light transmission is low because of the high
sensitivity type.
●Features
1) Compact surface mount package 1.6 x 1.6 mm
2) Output current in proportion to brightness
3) Suitable for optical window that the visible light transmission is low (High sensitivity type)
4) The influence of infrared is very small by an infrared cut filter
5) Supply voltage operates from 2.4V to 5.5V
6) Built-in shutdown function
7) 3 steps controllable output current gain
8) 1.8V logic input interface
9) Low sensitivity variation (+/-15%)
●Applications
Mobile phone, LCD TV, PDP TV, Laptop PC, Portable game console, Digital camera, Digital video camera, LCD display
●Absolute Maximum Ratings
Parameter
Supply Voltage
Operating Temperature
Storage Temperature
Iout Current
Symbol
Vmax
Topr
Tstg
Ioutmax
Pd
Limits
7
-40~85
-40~100
7.5
165※
Units
V
℃
℃
mA
mW
Power Dissipation
※ 70mm × 70mm × 1.6mm glass epoxy board. Derating at 2.2 mW/℃ for operating above Ta=25℃.
●Operating Conditions
Parameter
VCC Voltage
Symbol
Vcc
Min.
2.4
Typ.
3.0
Max.
5.5
Units
V
●Electrical Characteristics ( VCC = 3.0V, Ta = 25℃, unless otherwise noted )
Parameter
Supply Current1 ( Operate )
Supply Current2 ( 0 lx )
Supply Current3 ( Shutdown )
IOUT Output Current1(Dark Current)
IOUT Output Current2
Symbol
Icc1
Icc2
Icc3sd
Iout1
Iout2
λp
Min.
51.9
4.5
-
Typ.
75
9
0.2
-
Max.
105
13.5
0.4
0.2
70.1
-
Units
µA
µA
µA
µA
Conditions
Ev=10 lx (H-Gain Mode)※
Ev=0 lx (H-Gain Mode)
VGC1=V GC2=0 No Input Light
Ev=0 lx
-
51.9
-
61
530
µA
nm
Ev=10 lx (H-Gain Mode)※
Peak Wave Length
Ev=10 lx, RL=220kΩ
Saturated Output Voltage
VOMAX
2.6
2.9
3.0
V
(H-Gain Mode)※
GC1,GC2 Input ‘L’ Voltage
GC1,GC2 Input ‘H’ Voltage1
GC1,GC2 Input ‘H’ Voltage2
VIL
VIH1
VIH2
0
1.4
2.0
-
-
-
0.4
Vcc
Vcc
V
V
V
2.4V ≦ VCC ≦ 3.6V
3.6V < VCC ≦ 5.5V
Shutdown → H-Gain Mode
Ev=100lx※
Ev=10lx※
Wake-up Time
twu
rHM
rML
-
13
10
10
52
12
12
µs
Gain Ratio
H-Gain Mode/M-Gain Mode
Gain Ratio
M-Gain Mode/L-Gain Mode
※ White LED is used as optical source
8
8
times
times
Ev=10lx※
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
2012.02 - Rev.B
1/8