APPLICABLE STANDARD
Operating
Storage Temperature
Range
-10C to
+60C
-40C to
+105C
Temperature Range (2)
AC 30 V , DC 42 V
Rating
Voltage
Applicable Cable
Power : AWG#14 to 16
Signal : AWG#22 to 24
Power : φ2.6 to 3.0
Signal : φ1.4 to 1.6
Current (1) (6)
Power : 24 A(Ambient Temperature 25C) Insulation diameter
3
Signal : 1 A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Examined visually and with a measuring instrument.
Confirmed visually.
X
X
X
According to the drawing.
Marking
X
ELECTRICAL CHARACTERISTICS
X
X
Contact Resistance
Measured at DC 1A.
10 m MAX. (Power contact)
15 m MAX. (Signal contact)
1000 M MIN.
Insulation Resistance
Voltage Proof
Measured at 500 V DC.
X
X
X
X
600 V AC applied for 2 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
+0.003
Contact Insertion and
Measured with a φ1.98
steel gauge.
steel gauge.
Insertion and extraction forces: 1 N MIN. (Power contact)
Insertion and extraction forces: 0.2 N MIN. (Signal contact)
0
X
－
+0.003
Extraction Forces
Measured with a φ0.98
0
Mating and
Mating and unmating forces: 60 N MAX.
Measured with an applicable connector.
(Excluding lock mechanism.)
X
X
－
－
Unmating Forces
1
Contact resistance:10 m MAX. (Power contact)
15 m MAX. (Signal contact)
Mechanical Operation
Vibration
Mated and unmated 30 times.
Frequency: 10 Hz to 55 to 10 Hz every cycle (5 min per cycle) 1) No electrical discontinuity of more than 10 s.
X
X
－
－
Single amplitude: 0.75 mm
2) No damage, cracks or looseness of parts.
Performed over 10 cycles in each of three mutually
perpendicular directions.
Shock
Acceleration: 500 m/s2, Half sine wave pulses of 11 ms.
Performed 3 times in each of three mutually perpendicular
directions.
1) No electrical discontinuity of more than 10 s.
2) No damage, cracks or looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat, Steady State
Subjected to a temperature of +40 C, at a humidity of 90 to 1) Insulation resistance: 10 M MIN. (At high humidity)
95 % for 96 hours.
2) Insulation resistance: 100 M MIN. (When dry)
3) No damage, cracks or looseness of parts.
1) Insulation resistance: 100 M MIN.
X
X
X
－
－
－
Rapid Change of Temperature Temperature: -40 → R/T(4) → +105 → R/T(4) C
2) No damage, cracks or looseness of parts.
Time:
30 → 2 to 3 → 30 → 2 to 3 min
for 5 cycles.
Corrosion Salt Mist(3)
Subjected to 5 % salt spray for 48 h.
No heavy corrosion which impairs functionality.
Dry Heat
Cold
Subjected to +105 ℃ for 96 h.
Subjected to -40 ℃ for 96 h.
No damage, cracks or looseness of parts.
No damage, cracks or looseness of parts.
X
X
－
－
Sealing (IPX7) (3)
(JIS C 0920:2003)
Air Tightness(3)
Subjected to a depth of 1 m for 0.5 h.
No water penetration to the inside of the connector.
X
－
17.6kPa applied to the inside of the connector for 0.5min.
No air bubbles from the inside of the connector.
No water penetration to the inside of the connector.
X
X
－
－
Sealing (IPX6) (3)
(JIS C 0920:2003)
100L/min fountain water in all directions from a distance of
3m,3min.
2
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
SH.KOYAMA
CHECKED
DATE
3
△
2
DIS-C-00009416
EJ.KUNII
20211215
REMARK
Notes
APPROVED
CHECKED
DESIGNED
DRAWN
YH.YAMADA
20200128
20200128
20200128
20200128
(1) The above specifications show the values in assembled condition with applicable
crimp contacts(BH12-SC-213,BH12-SC1-213).
HN.TANAKA
SH.KOYAMA
SH.KOYAMA
(2) Including temperature rise due to current carrying.
(3) Corrosion salt mist, sealing and airtightness are tested in mated condition with an
applicable connector.
(4) R/T：Room Temperature.
Unless otherwise specified, refer to IEC 60512 (JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-390397-00-00
BH12WP-4SC
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
3
1/2
CL0140-0010-0-00
△
FORM HD0011-2-1
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
