Datasheet
LED driver series for LCD back light
White LED driver for medium sized
and large sized LCD back light
BD9470AEFV・BD9470AFM
●General Description
●Key Specifications
BD9470AEFV and BD9470AFM are high efficiency
driver for white LED. They are designed for large sized
LCD. BD9470AEFV and BD9470AFM are built-in
DCDC converter that supply appropriate voltage for
light source.
BD9470AEFV and BD9470AFM are also built-in
protection function for abnormal state such as OVP:
over voltage protection, OCP: over current limit
protection of DCDC, SCP: short circuit protection, open
detection of LED string.
VCC supply Voltage range:
LED minimum output current:
LED maximum output current:
DCDC oscillation frequency: 150KHz(RT=100Kohm)
Operation circuit current:
9.0V~35.0V
40mA
250mA
6mA(typ.)
-40℃~85℃
Operating temperature range:
●Applications
■ LED driver for TV, monitor and LCD back light
Thus they are used for conditions of large output
voltage and load conditions.
●Package
●Features
W (Typ.) x D(Typ.) x H(Max.)
18.50mm x 9.90mm x 2.41mm
9.70mm x 6.40mm x 1.00mm
6ch LED constant current driver
LED maximum output current 250mA
Individual PWM dimming modulation allowed for
HSOP-M28
HTSSOP-B28
LEDs
±2% LED current accuracy (when each LED is set
to 130mA)
Built-in LED feedback voltage automatic adjustment
circuit according to LED current
Built-in start-up circuit independent of PWM light
modulation
built-in VOUT・FB voltage maintenance function
when PWM=Low(0%)
Built-in LED current stabilization circuit while
scanning operation is performed
Built-in VOUT discharge circuit while shutdown
Built-in LED protection (OPEN / SHORT protection)
Figure 1. HSOP-M28
Individual detection and individual LED OFF for
both open and short circuit
Adjustable LED short-circuit protection threshold
PWM-independent LED protection
VOUT over voltage protection (OVP) and reduced
voltage protection (SCP) circuit
Built-in failure indication function
Built-in ISET pin short-circuit protection circuit
●Typical Application Circuit
VIN
ISET
SS
FB
PWM1
PWM2
PWM3
PWM4
PWM5
RT
DCDC_GND
N
CS
PWM
Figure 2. HTSSOP-B28
REG58
PWM6
VCC
STB
GND
STB
FAIL
FAIL
OVP
LSP
LED6
LED5
LED4
LED_GND
UVLO
LED1
LED2
LED3
Figure 3. Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays
www.rohm.com
TSZ02201-0F10C1002000-1-2
19.Oct.2013 Rev.003
© 2013 ROHM Co., Ltd. All rights reserved.
1/35
TSZ22111・14・001