Datasheet
PFC Direct current resonance type
White LED Driver for Large LCD
BD92111F
General Description
Key Specifications
BD92111F is a current resonance type LED Driver with
frequency-controlled LED current. It can connect to PFC
directly and can use half-bridge structure reducing the
number of external components.
Operating Power Supply Voltage Range:
8.0V to 18.0V
Minimum Oscillator Frequency:
65.8kHz
(RRT=22kΩ,RADJ=36kΩ,VFB=3.2V)
It incorporates some protection functions against fault
conditions such as Over-Voltage Protection and LED
Open Detection (IS Low Detection).
Operating Current:
Operating Temperature Range:
2.3mA (Typ)
-40°C to +85°C
Package
W(Typ) x D(Typ) x H(Max)
11.20mm x 7.80mm x 2.01mm
Features
SOP18
20V High Rating Process
Pin pitch
1.27mm
1 Channel Push-pull Control
Current and Voltage Feedback by Driving
Frequency
Adjustable Soft Start
Adjustable Timer Latch
Under-Voltage Detection for IC’s Power Line
Output Over-Voltage Protection
Output Error Signal from FAIL Terminal
Shift to Save Mode by STB Terminal
Burst Control by External PWM Signal
Applications
TV, Computer Display, LCD Backlighting.
Figure. 1 SOP18
Typical Application Circuit
< Primary Side >
VCC
VCC
GND
GND
PDIM
STB
PDIM
PVIN
ON/OFF
PWMIN
GND
PWM
ERR
FAIL
T1
CSS CSDON
CFBVS
CFBIS
RFBVS
RFBIS
RADJ
RRT
RS
CCP
< Secondary Side >
Figure. 2 Typical Application Circuit(s)
〇Product structure : Silicon monolithic integrated circuit 〇This product has no designed protection against radioactive rays
.www.rohm.com
TSZ02201-0F5F0C100090-1-2
31.Jan.2016 Rev.001
© 2016 ROHM Co., Ltd. All rights reserved.
1/24
TSZ22111 • 14 • 001