BD91411GW
Datasheet
Built-in OVP Micro USB Switch
with USB2.0, MHLTM and Audio
BD91411GW
●General Description
●Key Specifications
BD91411GW is USB connector interface IC.
It is possible to use it for the application for the mobile
device such as smart phones and mobile phones.
ꢀ OVP switch ON resistance:
ꢀ Over Current Protection(OCP):
ꢀ Regulator output voltage:
120mΩ(Typ.)
2.0A(Min.)
3.3V or 4.9V
ꢀ MHL/USB switch ON resistance:
ꢀ MHL/USB switch ON capacitance:
ꢀ VBAT standby current:
5Ω(Typ.)
6pF(Typ.)
6µA (Typ.)
-30℃ to +85℃
●Features
ꢀ Complete solution for mini/micro USB connect
multiplexing.
ꢀ Operating temperature range:
ꢀ MHL/USB/UART 2paths, AUDIO 1path, Monaural
Microphone 1path in 4 to 1 multiplexer.
ꢀ Compatible with USB High Speed/Full Speed.
ꢀ CECBUS to ID bypass switch.
ꢀ Audio switch handle with negative voltage signal.
ꢀ Microphone signal paths to VBUS or HDPR are built
in.
●Applications
ꢀ Mobile-Phones・Smart-Phones
ꢀ Tablet-PC
ꢀ Digital still camera(DSC)
ꢀ ID resistance support to CEA936A, Battery Charging
Specification (BCS) ver1.2, MCPC, USB-OTG and
MHL specification.
●Package
UCSP75M3
W(Typ.) x D(Typ.) x H(Max.)
3.00mm x 3.00mm x 0.85mm
ꢀ Power-On Reset.
ꢀ USB Charger detection support with BCS ver1.2
specification.
ꢀ Over voltage protection (OVP) up to 28V about
VB(VBUS) input and VC(cradle) input.
ꢀ Power multiplexer OVP input about VB and VC.
ꢀ Internal Low Ron FET about OVP(VB and VC).
ꢀ OTG power path switch (Output side in this power
path support 28V protection) is built in.
ꢀ VBUS linked LDO(4.9V or 3.3V are selectable.)
2
ꢀ I C compatible Interface.
●Typical Application Circuit
UCSP75M3
to Charger
CAP_VC
VOUT
Ccapvc
Ccapvb
Internal Power for OTG
CRADLE
VC
OTG_VIN
CAP_VB
USB
Receptacle
to MIC Amplifier
MICOUT
VBUS
VB
HDM1
HDM2
EARL
HDP1
HDP2
EARR
from MHL TX-
to USB PHY
HDML
HDPR
ID
D-
from HP Amplifier
from MHL TX-
to USB PHY
D+
from HP Amplifier
ID
to MHL TX/USB TRX
CBUS
GND
to Charger
Internal Power for SYSTEM IO
Rpu
VBAT
VDDIO
+
Battery
VCCIN
to Host
SCL
SDA
RST
INTB
VCDET
VBDET
Cvccin
Cvbref
to Host
from System Reset
to Host
to USB Transceiver
VBREG
to Host
to Host
to Host
to Host
to Host
OTG_DET
CHG_DET
FACT_DET
Fig.1 Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays
.www.rohm.com
TSZ02201-0B2B0H300010-1-2
12.Jul.2012 Rev.001
© 2012 ROHM Co., Ltd. All rights reserved.
1/24
TSZ22111・14・001