1/4
Structure
Silicon Monolithic Integrated Circuit
4ch Sensorless System Motor Driver for MD
BD6640KVT
Product Series
Type
Features
・Operates at low power supply voltage (2.1V min)
・Power DMOS output with low ON resistance (0.8Ω Typ.)
・Incorporates a charge pump circuit for VG boost.
・3-phase full-wave soft-switching sensorless driver for spindle
・3-value control 3-phase driver for sled (built-in comparator for BEMF voltage detection)
・2ch, 3-value control H-bridges for focus/tracking
・PWM half-bridge for spindle VM power supply
○Absolute maximum ratings(Ta=25℃)
Parameter
Symbol
VCC
VM
Limit
7
Unit
V
Power supply voltage for control circuit
Power supply voltage for driver block
Power supply voltage for pre-driver block
Input voltage
7
V
VG
14
V
VIN
0~VCC
*500
V
Output current
Iomax
Pd
mA
mW
℃
℃
℃
Power dissipation
**1250
-25~+75
-55~+150
+150
Operating temperature range
Storage temperature range
Junction temperature
Topr
Tstg
Tjmax
*Must not exceed Pd or ASO, Tjmax=150℃.
**Reduced by 10mW/°C over Ta=25°C, when mounted on a glass epoxy board (70mm70 mm1.6mm).
○Operating conditions (Ta=-25~+75°C)
Parameter
Symbol
VCC1,2
VM
Min.
Typ.
2.2
-
Max
6.5
5.0
13
Unit
V
2.1
Power supply voltage
Pulse input frequency
-
3
-
V
VG
6.5
-
V
fin
500
kHz
This product described in this specification is not judged whether it applies to COCOM regulations.
Please confirm in case of export.
This product is not designed for protection against radioactive rays.
REV. C