Sound Processors for Home Theater Systems
2ch
Electronic Volume
BD3812F
No.10081EAT03
●Description
BD3812F is an electronic volume having volume, gain amplifier functions necessary for applications in AV receivers, home
theatre systems, min-component systems and so forth. Having a chip select terminal, it can be controlled until 4 chips with
common bus line.
●Features
1) Residual noise : 1.2µVrms {dynamic range : 131dB (IHF-A)}
2) 2ch independent volume (0 to -103dB, MUTE 1dB/step)
3) 8ch at maximum available in combination of any of BD3811K1, BD3813KS, BD3814FV, BD3815KS (6ch volume)
in common bus line
4) It can be controlled until 4 chips with common bus line at the same time
5) Maximum output voltage : 4.2Vrms (Vcc=7, VEE=-7V, RL=10kΩ)
6) 2-line serial control (for both 3.3V and 5V)
7) Built-in Output gain amplifier for adjustment of output signal voltage (0, 6 to 18dB, 2dB/step)
8) Output mute controllable by serial data and external control terminal
●Applications
AV receivers, home theater systems, mini-component systems, etc.
●Absolute maximum ratings (Ta=25℃)
Parameter
Powewr supply voltage
Input signal voltage
Symbol
Ratings
Unit
V
VCC
VEE
7.5 *1
-7.5
VIN
Pd
VCC+0.3 to VEE-0.3
450*2
V
Power dissipation
mW
℃
Operating temperature range
Storage temperature range
Topr
Tastg
-20 to +75
-55 to +125
℃
*1
Even in the specified range of Power Supply Voltage, applying voltage only to the VCC side may
cause an excessive current to give a permanent damage to the IC.
When starting up power supplies, VEE and VCC should be powered on simultaneously or VEE first; then followed by VCC.
*2
Over Ta=25°C, reduce at the rate of 4.5mW/°C. When installed on the standard board (size: 70x70x1.6mm).
●Operating conditions
It must function normally at Ta=25°C.
Ratings
Parameter
Symbol
Unit
V
Min.
5
Typ.
7
Max.
7.3
-5
VCC
VEE
Operating source voltage
-7.3
-7
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2010.06 - Rev.A
1/9