ADVANCE
CYW43143
Single Chip IEEE 802.11 b/g/n MAC/PHY/Radio with
USB/SDIO Host Interface
The CYW43143 is a single-band, single-stream, IEEE 802.11n compliant, MAC/PHY/Radio system-on-a-chip with internal 2.4 GHz
Power Amplifier (PA) and integrated T/R switch. The CYW43143 supports internal RX diversity by providing two antenna ports. The
device enables development of USB or SDIO 802.11n WLAN clients that can take advantage of the high throughput and extended
range of Cypress second-generation solution. The CYW43143 maintains compatibility with legacy IEEE 802.11b/g devices.
State-of-the-art security is provided by industry standard support for WPA, WPA2 (802.11i), and hardware-accelerated AES
encryption/decryption, coupled with TKIP, IEEE 802.1X support, and a WLAN Authentication and Privacy Infrastructure (WAPI)
hardware engine.
Embedded hardware acceleration enables increased system performance and reduced host-CPU utilization in both client and access
point configurations. The CYW43143 also supports Cypress widely accepted and deployed WPS to easily secure WLAN networks.
■ SDIO and USB wireless client modules for digital TVs, Blu-ray Disc® players, set-top boxes, game consoles, and printers.
■ Supports the I2S digital audio interface.
■ Stand-alone wireless USB dongles and multimedia streaming boxes.
Cypress Part Numbering Scheme
Cypress is converting the acquired IoT part numbers from Broadcom to the Cypress part numbering scheme. Due to this conversion,
there is no change in form, fit, or function as a result of offering the device with Cypress part number marking. The table provides
Cypress ordering part number that matches an existing IoT part number.
Table 1. Mapping Table for Part Number between Broadcom and Cypress
Broadcom Part Number
Cypress Part Number
BCM43143
CYW43143
BCM43143KMLG
CYW43143KMLG
Features
Supports 3.3V ±10% power supply input with high efficiency
Power Management Unit (PMU).
■ Full IEEE 802.11b/g legacy compatibility with enhanced perfor-
mance.
■ Programmable dynamic power management.
■ Eight GPIOs with multiplexed JTAG interface.
■ Supports Cypress OneDriver™ software.
■ Supports drivers for Windows®, Linux®, and Android™
operating systems.
■ Complies with USB 2.0 specification and link power
management.
■ Comprehensive wireless network security support that
includesWPA,WPA2, andAESencryption/decryption, coupled
with TKIP, IEEE 802.1X support, and a WAPI encryption/
decryption engine.
■ Supports standard SDIO v2.0 (50 MHz, 4-bit and 1-bit) and
USB host interfaces.
■ 20 MHz reference clock.
■ Single stream IEEE 802.11n support for 20 MHz and 40 MHz
channels provides PHY layer rates up to 150 Mbps for typical
upper-layer throughput in excess of 90 Mbps.
IEEE 802.11x Key Features:
■ IEEE 802.11n compliant.
■ Supports the IEEE 802.11n RX space-time block coding
(STBC) and low-density parity check (LDPC) options for
improved range and power efficiency.
■ 2.4 GHz internal PA.
■ Internal T/R and RX diversity switches.
■ Supports MCS 0–7 coding rates.
■ Support for Short Guard Interval (SGI).
■ Supports an IEEE 802.15.2 external coexistence interface to
optimize bandwidth utilization with other colocated wireless
technologies such as GPS, WiMAX, LTE, Bluetooth, and UWB.
■ Supports USB 2.0, standard SDIO v2.0 (50 MHz,
4-bit and 1-bit) host interfaces.
■ Integrated ARM Cortex-M3 processor and on-chip memory for
complete WLAN subsystem functionality, minimizing the need
to wake up the applications processor for standard WLAN
functions. This allows for further minimization of power
consumption while maintaining the ability to field upgrade with
future features. On-chip memory includes 448 KB SRAM and
256 KB ROM.
■ Supports the I2S audio interface.
■ Greenfield, mixed mode, and legacy mode support.
■ 802.11n MPDU/MSDU aggregation support for high
throughput.
Cypress Semiconductor Corporation
Document Number: 002-15045 Rev. *F
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised April 20, 2017