Datasheet > B84299D1160E001

B84299D1160E001

更新时间： 2022-12-01 19:29:46

品牌	Logo	应用领域
爱普科斯 - EPCOS		/
页数	文件大小	规格书
8页	205K
描述
Three Phase EMI Filter, 250V, 50/60HzHz,

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

B84299D1160E001 数据手册

Filters for Power Lines

B84299-+1***-B1

B84299-+1***-E1

16 to 100 A, 100 dB from 150 kHz

Filter für:Netzleitungen

Two- and four-line filters

16 to 100 A

Single-stage

Stopband attenuation up to 40 GHz

Features

ꢀ General-purpose use through design with separate lines without intercoupling

ꢀ Use of single chokes

ꢀ Insertion loss to CISPR 17

Design

The electrical components are incorporated in an RF-tight case of stainless steel. The cables enter

through glands. The RF-tight termination of the openings is produced by specially shaped lids.

The conductors and equipment grounding conductor are connected by threaded bolts. The space

around the fixing holes is left as bare metal (unpainted) to ensure good RF contact with metal sur-

faces (chassis, ground).

Protective measures (grounding)

The high capacitances between the lines and ground require special protective measures. If there

are no product-specific requirements, protection with a secondary ground wire (diameter min.

10 mm²) in accordance with EN 50178 is necessary. For this purpose the filter case have connect-

ing bolts at each end.

Resistors are incorporated in the filter to discharge capacitors after turn-off.

Installation

Filters are supplied complete with all parts required for RF-tight installation (fixing screws, flanges,

RF gaskets, cable glands) and installation instructions.

No welding is needed on the shielding wall, so any subsequent installation is quite simple. And the

uniform template of the attachment points allows straightforward replacement of a two-line filter by

a four-line filter for example.

Accessories and special versions

RF-tight flexible connector fittings in widths of 25 and 40 mm are available for installation spaced

away from the shielding wall.

Filters with an EMP protection add-on for surge currents up to 100 kA per line are available on

request.

To match requirements, filters can be supplied with different kinds of EMC or shielding cable glands.

Tests

All filters are 100 % tested and the results are archived under a filter’s serial number. If required, a

test report can be generated for the serial number.

15 12/01

12 3 4 5 6 7 8

下载PDF

与B84299D1160E001相关器件

型号	品牌	描述	获取价格	数据表
B84299-D1160-E1	EPCOS	250V, 50/60Hz, THREE PHASE EMI FILTER	获取价格
B84299D1320B001	EPCOS	250V, 50/60Hz, SINGLE PHASE EMI FILTER	获取价格
B84299-D1320-B1	EPCOS	250V, 50/60Hz, SINGLE PHASE EMI FILTER	获取价格
B84299D1320E001	EPCOS	250V, 50/60Hz, THREE PHASE EMI FILTER	获取价格
B84299-D1320-E1	EPCOS	Three Phase EMI Filter, 250V, 50/60HzHz,	获取价格
B84299D1630B001	EPCOS	Filters for Power Lines	获取价格