Ferrite Inductors
フェライトインダクタ
Recommended patterns
推奨パターン図
Inductance Range: 1.0~100H
(Unit: mm)
(Unit: mm)
* :DS85LCB; 5.0mm Max.
FEATURES 特長
8.4 8.3mm Max. square, 5.0mm Max. height).
Magnetically shielded construction and low DC resistance.
Suitable for large currents.
8.4 8.3mm角Max. 高さ5.0 mm Max.
閉磁路構造、低直流抵抗
大電流対応
STANDARD PART NUMBERS 標準品一覧
TYPE DS85LCB (Quantity/reel; 500 PCS)
品番
インダクタンス(1)
許容差
直流抵抗(2)
直流重畳許容電流(3)
Inductance
温度上昇許容電流(3)
Temperature
Decrease Current(3)
DC
Part
Inductance(1)
Tolerance
(%)
Rise Current(3)
T=40C
Resistance(2)
(m) Max. (Typ.)
(A) Max. (Typ.)
Number
(H)
L
L
L
L
=10%
=30%
(A) Max. (Typ.)
B1135AS-1R0N=P3
B1135AS-1R5N=P3
B1135AS-2R2N=P3
B1135AS-2R7N=P3
B1135AS-3R6N=P3
B1135AS-4R7N=P3
B1135AS-6R8N=P3
B1135AS-100M=P3
B1135AS-150M=P3
B1135AS-220M=P3
B1135AS-330M=P3
B1135AS-470M=P3
B1135AS-680M=P3
B1135AS-101M=P3
1.0
1.5
2.2
2.7
3.6
4.7
6.8
10
±30
±30
±30
±30
±30
±30
±30
±20
±20
±20
±20
±20
±20
±20
9.6 (8.0)
11 (9.3)
13 (11)
14 (12)
17 (14)
7.8 (10.4)
6.3 (8.4)
5.5 (7.3)
4.7 (6.3)
4.2 (5.6)
3.7 (5.0)
3.1 (4.1)
2.4 (3.2)
2.0 (2.7)
1.7 (2.3)
1.4 (1.9)
1.2 (1.6)
0.97 (1.3)
0.79 (1.1)
10.1 (13.4)
8.3 (11.0)
7.1 (9.5)
6.2 (8.3)
5.6 (7.4)
4.9 (6.6)
4.1 (5.4)
3.2 (4.3)
2.6 (3.5)
2.2 (3.0)
1.8 (2.4)
1.5 (2.1)
1.3 (1.7)
1.1 (1.4)
8.5 (10.0)
7.6 (9.0)
7.3 (8.6)
6.5 (7.6)
5.5 (6.5)
5.1 (6.0)
4.0 (4.7)
3.3 (3.8)
2.5 (2.9)
2.3 (2.7)
1.9 (2.3)
1.6 (1.9)
1.3 (1.5)
1.1 (1.3)
21 (17)
29 (25)
45 (38)
64 (53)
15
22
84 (70)
33
47
68
100
110 (90)
150 (125)
235 (195)
330 (275)
(1)Inductance is measured with a LCR meter 4284A (Agilent
Technologies) or equivalent.
(1)インダクタンスはLCRメータ4284A(Agilent Technologies)
または同等品により測定する。
Test frequency at 100kHz
測定周波数は100kHz。
(2)DC resistance is measured with 34420A (Agilent Technologies) or
3541(HIOKI). (Reference ambient temperature 25°C)
(3)Maximum allowable DC current is that which causes a 10%
inductance reduction from the initial value, or coil temperature to
rise by 40°C, whichever is smaller. (Reference ambient
temperature 20°C)
(2) 直流抵抗は測定器34420A(Agilent Technologies)または3541
(HIOKI)と同等品により測定する。(周囲温度25°C)
(3)最大許容電流は、直流重畳電流を流した時インダクタンスの値が
初期値より10%減少する直流電流値、または直流電流により、
コイルの温度が40°C上昇の何れか小さい値。(周囲温度20°Cを基準
とする。)