Document 372-1
For National Semiconductor
Planar Magnetics LM5025 and LM5034
Planar transformer and inductor pair designed for the NSC
LM5110 Gate Driver and LM5025 Active Clamp Voltage
Mode PWM Controller.
These parts are also specified by NSC for use with their
LM5034 Dual Interleaved Controller.
Core material Ferrite
Terminations RoHS Matte-tin over nickel over brass
Weight 11.3 – 11.7 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200 per 13″ reel Plastic tape: 44 mm wide,
0.37 mm thick, 32 mm pocket spacing, 9.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
Transformer
Output
current
(A rms)
Primary
inductance2
min (µH)
Leakage
inductance3
max (µH)
Pri/sec
isolation
(Vdc)
DCR max
(mOhms)
Part
Output
power (W)
Output
voltage (V)
number1
B0357-BL_
100
3.3
30.0
320.0
0.55
Primary: 55.0
Secondary: 1.0
1500
1. When ordering, please specify packaging code:
B0357-BLD
2. Inductance measured on an Agilent/HP 4284 between pins 1 and 2 at
250 kHz, 0.1 Vrms, 0 Adc.
3. Leakage inductance measured between pins 1 and 2 at 100 kHz,
0.1 Vrms, 0 Adc with secondary pins shorted.
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic
tape (200 parts per full reel).
4. Electrical specifications at 25°C.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
3
0.920
max
1
2
23,37
0.800
20,32
0.125
3,18
Pri
Sec
1
1
4
3
4
3
0.200
5,08
0.810
20,57
0.400
10,16
0.250
6,35
4
max
2
12 : 2
2
0.110
2,79
Ø
0.080
2,03
Recommended
Land Pattern
Ø
Parts manufactured prior
to December 2011 may
be marked differently.
0.360
9,14
max
inches
mm
Dimensions are in
0.006/0,15
Document 372-1 Revised 12/19/11
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.