AZ8 2 0
SUBMINIATURE
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• Life expectancy to 10 million operations
• Standard PC 0.1" grid terminal spacing
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL file E43203, CSA file LR36664
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
5 x 105 at 1 A 30 VDC
(see table for additional figures)
Operate Time (typical) 5 ms at nominal coil voltage
CONTACTS
Release Time (typical) 2 ms at nominal coil voltage
Arrangement
DPDT (2 Form C)
(with no coil suppression)
Bifurcated crossbar contacts
Capacitance
Contact to contact: 1.5 pF
Contact set to contact set: 1.5 pF
Contact to coil: 2.6 pF
Ratings
Resistive load:
Max. switched power: 30 W or 60 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
UL Rating: 1 A at 30 VDC
Bounce
(typical)
At 10 mA contact current
2 ms at operate N.O. side
3 ms at operate N.C. side
0.5 A at 125 VAC
Dielectric Strength
(at sea level for 1 min.) 1500 Vrms all other points
1000 Vrms N.C. contact to coil, energized
Material
Silver palladium, gold clad
< 50 milliohms initially
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Resistance
Meets FCC Part 68.304 1000 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
COIL
Dropout
Greater than 10% of nominal coil voltage
Power
At Pickup Voltage
(typical)
Ambient Temperature At nominal coil voltage
250 mW
Operating
Storage
-55°C (-67°F) to 75°C (167°F)
-55°C (-67°F) to 120°C (248°F)
Max. Continuous
Dissipation
1.1 W at 20°C (68°F)
.9 W at 40°C (104°F)
Vibration
0.062" DA at 10–55 Hz
20 g
Shock
Temperature Rise
Temperature
45°C (81°F) at nominal coil voltage
Max. 120°C (248°F)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
NOTES
80°C (176°F)
1. All values at 20°C (68°F).
Max. Immersion Time 30 seconds
Weight 5 grams
2. Relay may pull in with less than “Must Operate” value.
3. Relay adjustment may be affected if undue pressure is exerted
on relay case.
4. Specifications subject to change without notice.
2/17/99W