AZ7709
SPST SUBMINIATURE
POWER RELAY
FEATURES
• 4 kV dielectric strength
• Proof tracking index (PTI/CTI) 250
• 5 Amp switching capability (version “T” 10 Amp)
• Epoxy sealed version available
• Class F insulation available
• UL, CUR file E365652
• TUV B140171811019
CONTACTS
GENERAL DATA
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105
Max. switched power: 150 W or 1250 VA
(Version “T”: 300 W or 2500 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage:30* VDC or 250 VAC
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
4000 Vrms coil to contact
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
Standard Coil
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
5 A at 250 VAC, Res., 100k cycles, 85°C
5 A at 30 VDC, Res., 100k cycles, 85°C
1/6 HP, 125 / 250 VAC, 100k cycles, 85°C
Dropout
Greater than 5% of nominal coil voltage
Sensitive Coil
3 A at 250 VAC, Res., 100k cycles, 85°C
3 A at 30 VDC, Res., 100k cycles, 85°C
Ambient Temperature At nominal coil voltage
Operating
-30°C (-22°F) to 60°C (140°F) Standard Coil
-30°C (-22°F) to 80°C (176°F) Sensitive Coil
‘T’ High Current Version:
Standard Coil
Storage
-30°C (-22°F) to 105°C (221°F)
Enclosure
P.B.T. polyester
10 A at 250 VAC, Res., 100k cycles, 85°C
10 A at 30 VDC, Res., 100k cycles, 85°C
1/6 HP, 125 / 250 VAC, 100k cycles, 85°C
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Sensitive Coil
8 A at 250 VAC, Res., 100k cycles, 85°C
8 A at 30 VDC, Res., 100k cycles, 85°C
80°C (176°F)
Standard Coil
Max. Immersion Time 30 seconds
TÜV
5 A at 250 VAC / 30 VDC, Res.,100k cycles
Weight
6 grams
10 A at 250 VAC / 30 VDC, Res.,100k cycles ( “T” Ver. )
Sensitive Coil
3 A at 250 VAC / 30 VDC, Res., 100k cycles
8 A at 250 VAC / 30 VDC, Res., 100k cycles (“T” Ver. )
COIL
Material
Silver Cadmium, Silver Tin Oxide, Silver Alloy
Power
At Pickup Voltage
(typical)
.220 W standard
.113 W sensitive
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
Max. Continuous
Dissipation
.760 W at 20°C (68°F) ambient
NOTES
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 105°C (221°F)
Max. 155°C (311°F) class F
7/7/14