AZ7709
SPST SUBMINIATURE
POWER RELAY
FEATURES
• 4 kV dielectric strength
• Proof tracking index (PTI/CTI) 250
• 5 Amp switching capability (version “T” 10 Amp)
• Epoxy sealed version available
• UL, CUR file E365652
• TÜV file B150188793002
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 150 W or 1250 VA
(Version “T”: 300 W or 2500 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
GENERAL DATA
Life Expectancy
Mechanical
Minimum operations
7
Rated Load
UL, CUR
1 x 10
Standard coil
5 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
5 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
Standard version
5
Electrical
1 x 10 at 5 A 250 VAC Res.
High capacity version “T”
5
Sensitive coil
Electrical
1 x 10 at 10 A 250 VAC Res.
3 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
3 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
Operate Time (max.)
Release Time (max.)
8 ms at nominal coil voltage
4 ms at nominal coil voltage
(with no coil suppression)
High capacity version “T” - Standard coil
10 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
10 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3]
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
1000 megohms min. at 20°C, 500 VDC,
50% RH
High capacity version “T” - Sensitive coil
Resistance
8 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3]
8 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3]
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution dregree: 3
Nominal voltage: 250 VAC
TÜV
Standard coil
5 A at 250 VAC, 100k cycles [1][2]
5 A at 30 VDC, 100k cycles [1][2]
Dropout
Greater than 5% of nominal coil voltage
Sensitive coil
Ambient Temperature
Operating
At nominal coil voltage
3 A at 250 VAC, 100k cycles [1][2]
3 A at 30 VDC, 100k cycles [1][2]
-40°C (-40°F) to 85°C (185°F)
Vibration
1.65 mm DA at 10–55 Hz
10 g operating, 100 g damage
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
High capacity version “T” - Standard coil
10 A at 250 VAC, 100k cycles [1][2]
10 A at 30 VDC, 100k cycles [1][2]
Shock
Enclosure
Terminals
High capacity version “T” - Sensitive coil
8 A at 250 VAC, 100k cycles [1][2]
8 A at 30 VDC, 100k cycles [1][2]
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
5 seconds
Material
Silver cadmium oxide [1], silver tin oxide [2],
silver tin oxide indium oxide [3],
gold plating available
80°C (176°F)
30 seconds
6 grams
Resistance
< 100 milliohms initially
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-04-09
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
