AZ762
16 A SPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006031
GENERAL DATA
CONTACTS
Arrangement SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 16 A 250 VAC Res.
SPST (1 Form A)
Ratings
Resistive load:
Operate Time (typical)
7 ms at nominal coil voltage DC coils
10 ms at nominal coil voltage AC coils
Max. switched power: 480 W or 5540 VA
Max. switched current: 16 A
Release Time (typical) 3 ms at nominal coil voltage
Max. switched voltage: 125 VDC* or 440 VAC
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
5000 Vrms coil to contact
Material
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3]. Gold plating available
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Resistance
< 50 miliohms initially
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
DC coils
AC coils
Greater than 10% of nominal coil voltage
Greater than 15% of nominal coil voltage
COIL
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F) DC coils
Power
At Pickup Voltage
200 mW standard DC coil
140 mW sensitive DC coil
.422 VA (AC coil)
-40°C (-40°F) to 70°C (158°F) AC coils
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
(typical)
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient
1.7 VA at 20°C (68°F) ambient
Shock
10 g
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Temperature Rise
26°C (47°F) standard coil
17°C (31°F) sensitive coil
Terminals
(at nominal coil voltage)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Temperature
Max. 130°C (266°F)
80°C (176°F)
NOTES
Max. Immersion Time 30 seconds
1. All values at 20°C (68°F).
Weight
14 grams
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Packing unit in pcs
50 per plastic tray / 500 per carton box
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
2014-01-29
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf