AZ733WC
DPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 1.5 mm contact gap
• Epoxy sealed version available
• Isolation spacing greater than 8 mm
• UL Class B insulation system, class F available
• UL, CUR file E44211
• TÜV file pending
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 105
1 x 105 at 10 A 240 VAC Res.
Arrangement DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Operate Time (typical) 10 ms at nominal coil voltage
7 ms at 1.5 x nominal coil voltage
Max. switched voltage: 150 VDC* or 400 VAC
4.5 ms at 2.0 x nominal coil voltage
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL, CUR
Dielectric Strength
(at sea level for 1 min.) 3000 Vrms between open contacts
5000 Vrms contact to coil
Silver Cadmium oxide contacts:
3000 Vrms between contact sets
TV-3, 125 VAC, 25K cycles, NO Side Only 10A,
250 VAC, 100K cycles, General Use 10A, 30
VDC, 50K cycles NO/NC contacts, Res
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Silver Tin oxide contacts:
Dropout
Greater than 10% of nominal coil voltage
12 A, 277 VAC / 250 VAC, Resistive, 70°C, 8K cycles
1/3 HP 125 VAC, 40°C, 1K cycles
Ambient Temperature at nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
3/4 HP 250 VAC, 40°C, 1K cycles
10 A at 30 VDC, 250 VAC resistive
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
10 g
TÜV pending
Material
Vibration
Silver cadmium oxide; Silver Tin oxide;
Gold Plate optional
Shock
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
COIL
Max. Immersion Time 30 seconds
Power
Weight
18 grams
At Pickup Voltage
(typical)
.8 mW
NOTES
Max. Continuous
Dissipation
2.3 W at 20°C (68°F) ambient
1.9 W at 40°C (104°F) ambient
1. All values at 20°C (68°F).
Temperature Rise
Temperature
51°C (65°F) at nominal coil voltage
Max. 130°C (266°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4/27/2015