AZ2703
30 AMP POWER RELAY
FEATURES
• Low cost
• 30 Amp switching
• Class B insulation system standard, Class F available
• PC mount
• 4 kV dielectric
• UL, CUR file E44211
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form X)
DPST (2 Form X)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at rated load
Ratings
Resistive load:
Operate Time (typical) 30 ms at nominal coil voltage
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 150* VDC or 400 VAC
Release Time (typical) 30 ms at nominal coil voltage
(with no coil suppression)
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Rated Load
UL, CUR
30 A at 277 VAC res. 30k
1.5 HP at 120 VAC
3 HP at 240 VAC
Insulation
1000 megohms min. at 20°C, 500 VDC,
50% RH
Resistance
TV-10 at 120 VAC
Dropout
Greater than 5% of nominal coil voltage (DC)
Greater than 15% of nominal coil voltage (AC)
Minimum Load 5 VDC, 0.1 A
Material
Silver alloy
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 130°C (266°F)
Resistance
< 100 milliohms initially
(24 V, 1 A voltage drop method)
Vibration
0.062" DA at 10–55 Hz
COIL
Shock
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Power
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
At Pickup Voltage
(typical)
1.08 W (DC)
1.7 VA (AC)
Enclosure
P.B.T. polyester
Tinned copper alloy, PC mount
270°C (518°F)
Max. Continuous
Dissipation
4.0 W at 20°C (68°F) ambient
Terminals
Max. Solder Temp.
Max. Solder Time
Weight
Temperature Rise
Temperature
50°C (90°F) at nominal coil voltage
Max. 130°C (266°F)
5 seconds
120 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
10/4/00W