AZ2850
30 AMP MINIATURE
POWER RELAY
FEATURES
• DPST-NO and DPDT configuration
• Meets 8 mm creepage, 4 kV dielectric
• Epoxy selead version available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40023442
CONTACTS
Arrangement DPST (2 Form A)
DPDT (2 Form C)
Ratings
Resistive load:
GENERAL DATA
Max. switched power: 560 W or 8310 VA
Max. switched current: 30 A (N.O.), 3 A (N.C.)
Max. switched voltage: 30 VDC* or 600 VAC
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 107
1 x 105 at 30 A 277 VAC Res. (N.O.)
Operate Time
15 ms typical
25 ms maximum with bounce
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Release Time
10 ms typical
25 ms maximum with bounce
(with no coil suppression)
Rated Load
UL
Normally open contacts (N.O.)
30 A at 277 VAC, General Use, 100k cycles [1][2]10
A at 600VAC, General Use, 6k cycles [1]
1 HP at 120 VAC, 100k cycles [1][2]
Dielectric Strength
(at sea level for 1 min.) 4000 Vrms contact to coil
1500 Vrms contact to contact
2.5 HP at 240 VAC, 100k cycles [1][2]
8 FLA / 26 LRA at 277, 480, 600 VAC, 30k cycles[1]
2000 Vrms between contact sets
Insulation Resistance 109 ohms minimum at 500 VDC
Normally open contacts (N.O.), DC coils only
25.3 FLA / 110 LRA at 240 VAC, 30kcycles [1][2]
Dropout
DC:Greater than10%of nominal coilvoltage
AC: Greater than 20%of nominal coilvoltage
Normally closed contacts (N.C.)
Ambient Temperature At nominal coil voltage
3 A at 277 VAC, General Use, 100k cycles [1][2]
2 A at 480 VAC, General Use, 6k cycles [1]
1 A at 600 VAC, General Use, 6k cycles [1]
3 FLA / 3 LRA at 240 VAC, 30k cycles [1]
2 FLA / 2 LRA at 277, 480 VAC, 30k cycles [1]
1 FLA / 1 LRA at 600 VAC, 30k cycles [1]
Operating
DC: -40°C (-40°F) to 85°C (185°F)
AC: -40°C (-40°F) to 65°C (149°F)
-40°C (-40°F) to 105°C (221°F)
Storage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
Operational, 10 g for 11 ms 1/2 sine pulse
(no contact opening > 100usec)
Non-destructive, 100 g for 11 ms 1/2 sine pulse
VDE
Normally open contacts (N.O.)
30 A at 250 VAC, resistive, 50k cycles [2]
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Normally closed contacts (N.C.)
3 A at 250 VAC, resistive, 50k cycles [2]
Terminals
Material
Silver cadmium [1], silver tin oxide [2],
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Resistance
< 50 milliohms initially
(at 6 V, 1 A, voltage drop method)
80°C (176°F)
COIL
Max. Immersion Time 30 seconds
Power
At Pickup Voltage 925 mW, DC coil
Weight
86 grams
(typical)
2.6 VA, AC coil
Packing unit in pcs
20 per plastic tray / 100 per carton box
Max. Continuous
Dissipation
5 W at 20°C (68°F) ambient, DC coil
7 VA at 20°C (68°F) ambient, AC coil
NOTES
1. All values at 20°C (68°F).
Temperature Rise 48°C (86°F) at nominal coil voltage, DC coil
68°C (122°F) at nominal coil voltage, AC coil
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 155°C (311°F)
4-30-13